Category: Dillon General

Page 1 of 2
1 2

Overview: Mark 7 Autodrive for Dillon XL-750 and XL-650 Reloading Presses

Dillon is known for equipment that’s well suited for high-volume reloading. That’s why a lot of pistol competitors use Dillon equipment to load match ammo. Sometimes these competitors load literally thousands of rounds per month. And that that rate, you start to look for ways to increase speed and efficiency. One of the ways to […]

Frankenlöder – 9mm with Hornady-RCBS Bullet Feeder Setup on Dillon XL-650 – Part III

In this third installment of the Frankenlöder 9mm Dillon+Hornady+RCBS series, we’ll build on what we talked about in the first post and second post. We’ve seen what it takes to setup the Dillon XL-650 with Hornady 9mm dies, and also modified the drop tube from the RCBS Pistol Bullet Feed kit in order to get […]

Frankenlöder – 9mm with Hornady-RCBS Bullet Feeder Setup on Dillon XL-650 – Part II

In my previous post, I walked through the process of setting up the Dillon XL-650 to load 9mm Luger ammunition with Hornady pistol dies. In this post, we’ll cover adding a bullet feeder to this setup. What will be unique about this setup will be the fact that we’ll use most of the RCBS pistol […]

Frankenlöder – 9mm with Hornady-RCBS Bullet Feeder Setup on Dillon XL-650 – Part I

Dillon XL-650 Press + Hornady Dies + RCBS Bullet Feeder + Hornady Bullet Feed Die In this multi-part Frankenlöder series, we’ll be using the Dillon XL650 to load 9mm Luger. What’s going to make this scenario interesting is the fact that we’ll be using Hornady dies, including the Hornady 9mm pistol bullet feed die. In […]

Dillon XL-650 Quick Switch Kit – Magnum/Special

As tinkering guys, we are always looking to make our machinery smoother, faster, better, and more efficient. If there’s a way to squeeze more out of our equipment, chances are one of us will think of a way to make that happen! One of these tinkerers is Doug Williams. Doug is a big fan of […]

Page 1 of 2
1 2



Reloading Safety

Polls