Ever wonder how to get started in long range precision shooting? Today, we’re getting tips from F-Open champion Erik Cortina! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
Tag: Brux Barrel
Cortina Precision Bullet Flow System
The Cortina Precision Bullet Flow System is designed to expedite bullet tip uniforming for more consistent BC’s bullet to bullet on a progressive press. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
Part 3: 7 PRCW Bedding and Break In
Ever since I met Erik Cortina, I’ve been curious about F-Class. It’s finally time to shoot my very own 7 PRCW! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
7 PRCW Build Part 2: EC Tuner V2 Machining/Install
I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2! *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]
7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
