Frankford Arsenal’s X-10 sports lots of room for a variety of dies and checks. Rather than process brass in one sequence and load in another, today I’m making use of the X-10’s many stations for an end-to-end process. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content […]
Would you like to speed up your single-stage reloading process? InLine Fabrication’s case eject and die storage systems can help you do just that! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
Bulk-loading a 55-gallon drum of Mojo Precision .223 brass takes industrial equipment. With a fully setup Dillon XL-750 and Armanov bullet feeder, loading rounds just becomes a matter of pulling a handle! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content […]
Did you know that Boyds offers nice walnut stocks? Boyds is well known for their colorful, laminated rifle stocks, but it’s not as well known that they also offer walnut and maple in standard, X and XX grades. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content […]
Berry’s makes a wide range of reloading products. Their plated bullets offer an interesting and affordable alternative to either jacketed or cast bullets. I’ve used their bullets in various handguns for many years. Here at Ultimate Reloader, we’ve used Berry’s bullets in other handguns and rifles including the .30-30 Winchester. This was our first use […]
We’ve previously featured Ultradyne’s UD7 chassis with Cerakote. This time, we’re looking at this chassis in its most compact form—the UD3. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
After bulk-processing .308 brass with the CP 2000 and DA 3000, we’re bulk loading tracers and subsonic rounds on the Dillon RL-550C. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical […]
Armanov makes a number of Dillon press upgrades, like the RL1100 lock-n-load toolhead. This time, we’re tricking out our Dillon XL-750! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
We’ve spent lots of time highlighting the Apex 10 Autodrive and the numerous sensors available for it. This time, we’re bringing the Autodrive technology to another favorite—the Dillon RL1100! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]
