A short while ago, we asked for input on our .308 build. Overwhelmingly, you all wanted a 16” barrel, so “Shorty” was born! Looking to compare velocities, I brought out my match .308 with a 24” barrel to compare the results with some Hodgdon pistol data! (Yes, .308 Pistol data.) Disclaimer Ultimate Reloader LLC / […]
Tag: Varmint Hunting
Basic Rifle Reloading 5: Bullet Seating & Crimping
At this point we have cleaned and lubed the brass, resized it, primed it and dropped in the powder charge. It’s time to seat the bullet! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]
45 Colt: Shooting and Reloading
This time, I had an opportunity to introduce Gavin to a cartridge he’s never shot before, though it’s been around for over almost 150 years, the .45 Colt. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]
Quick Look: Cole-TAC Ammo Novel
Looking for a compact way to store your bolt-gun ammo? Check out the Ammo Novel from Cole-TAC. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) […]
500 S&W Mag with Hornady 350gr XTP Bullets
Nearly twenty years ago, Smith & Wesson introduced their huge new X-frame double-action revolver along with the 500 S&W cartridge. Hornady loaded the first 500 S&W ammunition, sending a 350 grain hollow-point XTP bullet at an advertised 1900 fps! We recently tested some 500 S&W ammunition handloaded with the 350 grain Berry’s plated flat nose […]
TESTED: 357 Magnum Hornady 140 grain FTX Bullets
The 357 magnum cartridge has been around for a rather long time. It was developed in the 1930’s by Elmer Keith, Phillip B. Sharpe, and Douglas B. Wesson. This group intended to make a high-velocity revolver cartridge which could pierce automobile bodies and early ballistic vests. The 357 magnum has since established a good track […]
Loading PRECISION 308 Hunting Ammunition (MEC Marksman)
Can hunting ammo be as accurate as match ammo? Let’s find out! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. […]
TESTED: Ultra-Light Weight: MDT HNT 26 Chassis (6.5 PRC)
When I saw the MDT HNT26 Ultra-Light-Weight hunting chassis at SHOT show this year, I couldn’t believe how light it was! I finally got my hands on this lightweight chassis system, so in this story we are going to get it set up with the ultra lightweight 6.5 PRC, and put it to work! Disclaimer […]
Have a Need for Speed? Try the 204 Ruger!
What happens when two firearms industry giants put their heads together? The 204 Ruger, brainchild of Ruger and Hornady, is known for its high velocity, accuracy potential, minimal recoil and flat trajectory. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content […]
Hands-On: Lyman Universal Case Trimmer
Want a trimmer that can do it all? The Lyman Universal Case Trimmer can accommodate calibers from .22 to .458 without extra collets and can be converted to a power trimmer! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on […]
TESTED: MDT Gen 2 CKYE-POD Triple Pull
I’ve been a fan and user of the MDT CKYE-POD since it first came out and have been desperate to test the MDT Gen 2 CKYE Triple-Pull Bipod. Here we take a closer look at its capabilities for both small and large calibers. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this […]
Loading the 25-06 Hunting Loads with the MEC Marksman Press
We’re going step-by-step on how to handload reliable and accurate 25-06 hunting cartridges on the MEC Marksman single stage press. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
Salmon River Solutions Hunters Rail Upgrade
Considering an upgrade to your rifle for accessories? We tested the Salmon River Solutions Hunters Rail on a 6.5 PRC. See our thoughts below! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]
TESTED: Hodgdon H4350 Smokeless Powder
One of the most popular powders among both target shooters and hunters is Hodgdon’s famed H4350. Let’s take a closer look at this versatile powder! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]
22GT Ultra-Light Weight Build (Start to Finish)
Ever since I heard about the 22GT I thought to myself: I need to build one of these! And that’s exactly what I’m going to cover in this story- my ultra-light-weight 22GT build start to finish. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]
NEW: Bergara MGLite 6.5 Creedmoor with CURE Carbon Barrel
Today Bergara announced a new carbon technology called “CURE”. As a part of this announcement, Bergara has debuted a new ultralight rifle called “MGLite” that features a CURE carbon barrel! In this story, we’ll get hands-on with the MG Lite chambered in 6.5 Creedmoor. *Correction- the 20 MOA picatinny scope rail shown in this video […]
Father / Son Deer Hunt: 6mm Remington + 30-06
Written by Guy Miner. A father and a son, a 6mm Remington and a 30-06, and two mule deer taken! That’s what you call a successful deer hunt. To find out more about how things went down, read on! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]
Budget Reloading with Lyman Gear
This article was written by Guy Miner. Here on Ultimate Reloader we showcase some very sophisticated, high end handloading equipment. But, do all reloaders need such expensive gear? Guy say’s no. That’s right – I’m primarily a hunter these days and am content loading about 50 cartridges for each of the rifles my son and […]
TESTED: Leupold Mark 5HD 7-35x56mm Riflescope (Part 2)
We are back with part two of this two-part story featuring the Leupold Mark 5 HD Riflescope! In part one, we covered unboxing, features, installation, and bedding the rings to the scope tube. The Mark 5HD has 32 variations, ours being the 7-35x56mm version with the Leupold proprietary CCH reticle. For this story, we’ll pick […]
Is 30-06 Boring for Big Game Hunting? (Results)
Written by Guy Miner I often hear from other hunters that they don’t like the 30-06 cartridge because it’s “boring.” Well, they must have a different definition of the word, for I find it to be an exemplary hunting cartridge with an impressive track record. Leaving out the two world wars, Korea, some of Vietnam […]
45-70: Intro to Reloading and Shooting (Marlin 1895 Lever Gun)
Written by contributing author, Guy Miner. In this story, Gavin introduces Guy to the MEC Marksman press! Guy introduces Gavin to the Marlin 1895 rifle and the 45-70 cartridge. It was quite a change using a blunt nose 350 grain rifle bullet. The rifle and cartridge have been in use for a long time and […]
