Tag: Dillon Precision

Page 1 of 3
1 2 3

All-New Dillon Bullet Feeder

Dillon Precision just launched their bullet feeder! We’re ready to put it to work, and we’ve got some awesome content on the way. In this video, we’ll go over what’s included, install it on the XL750, and walk through the setup. Once we’re running we’ll load some 9mm and perform a caliber change to load […]

Next Level Dillon 550 Setup: Loading 7PRCW Competition Ammo

When it comes to loading precision rifle ammo, most people don’t immediately think of a progressive press. But with the right setup and careful attention to detail, the Dillon 550 can produce extremely consistent and accurate ammunition. In this article, I’ll take you through my process for loading precision rounds on the Dillon 550, sharing […]

Progressive Press Quick Start Guide

Have you thought about progressive reloading but don’t know where to start? This video will give you a quick primer to help get you started!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]

Case Cleaning with Dillon’s Vibratory Cleaner & Media Separator (CV-2001 and CM-2000) in BULK!

Our most recent insane project is bulk-processing 55-gallon drums of once-fired 9mm and .223 brass from Mojo Precision! With approximately 45,000 .223 cases and 80,000 9mm cases to clean, we got to work with the Dillon CV-2001 and CM-2000!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]

Shotshell Reloading with the Dillon SL900 – Hands On!

Shotgun ammunition goes FAST. To keep up, we’ve got the Dillon Precision SL900 Shotshell Reloader!  Disclaimer  Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for […]

Cortina Precision Bullet Flow System

The Cortina Precision Bullet Flow System is designed to expedite bullet tip uniforming for more consistent BC’s bullet to bullet on a progressive press. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]

Black Friday DEALS from Mark 7 Reloading!

You’re going to want to check out these deals on Mark 7 gear as a part of Black Friday 2023! These deals are valid between now and November 30, 2023, so don’t waste any time… Deal 1: Autodrive Price Slash + Bonus Buy an Autodrive at only $1999 AND get a free sensor, note that […]

.300 Blackout Issue Solved: Sheridan Engineering Gauge

Using the correct case gauge can save a lot of time and prevent considerable headaches. Sheridan Engineering’s slotted gauge helped me solve a problem I was having with .300 Blackout.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

Precision on a Progressive: 6GT on the Dillon RL-550C

It’s time to crank out some precision 6GT ammunition on a progressive! In this story, I’ll outline what to look for when loading precision ammunition on a progressive, and get a Dillon RL-550C ready to roll with 6GT. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content […]

Page 1 of 3
1 2 3