Have you ever been curious if there was a faster way? In this video we test the new RCBS MatchMaster Funnel Kit and compare it to a few other funnels! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]
Matt Findlay of Annealing Made Perfect spent some time with Gavin at SHOT Show 2025 to talk about the most common issues users face with the AMP Mate and how to solve them. I thought I’d highlight them as well! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]
Frankford Arsenal’s X-10 sports lots of room for a variety of dies and checks. Rather than process brass in one sequence and load in another, today I’m making use of the X-10’s many stations for an end-to-end process. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content […]
FW Arms’ .223 dies were central to the success of our mega brass processing project with Mojo Precision and Mark 7. This time, we’re testing FW Arms’ 9mm hybrid sizing die with dynamic spring hold down! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]
Tired of having the incorrect shellholder for your hand primer? Ever have a shellholder go missing at the most inopportune time? The RCBS Universal Hand Priming tool eliminates the need for shellholders! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content […]
Are you curious about wet tumbling but don’t have any of the needed equipment? Frankford Arsenal’s Rotary Tumbler Lite Pro Kit includes everything you need to get started! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]
Would you like to speed up your single-stage reloading process? InLine Fabrication’s case eject and die storage systems can help you do just that! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
We’ve been shooting a lot of .308 lately —in fact —we are out! We need to crank out a ton more, so this was a great time to set up a progressive press. I’ve been working with the Frankford Arsenal X-10 lately. Along the way, I’ve come across some notable gear like the Frankford Arsenal […]
Bulk processing over 40,000 .223 cases from Mojo Precision on the Mark 7 Apex 10 was just the start of the process. We decapped using FW Arms dies and Berdan Sentry, resized with the Lyman carbide pro die, and trimmed with the Mark 7 Power Trim Xpress. We decided to run a dedicated priming session […]
