Tag: TESTED

TESTED: Hornady 110gr A-Tip 6mm Bullets

One of my favorite things to do is testing components like bullets. In this story, we’ll take a hands-on look at Hornady’s new 110 grain A-Tip 6mm bullets. Both at the range, and in the “laboratory”. If you’re curious about these bullets, you’re in the right place! Please Welcome Travis Fox I recently enlisted the […]

TESTED: RCBS Uniflow III Bench Powder Measure

The RCBS Uniflow III is the latest bench powder measure from RCBS, and in this article, we’ll take a hands-on look at this new powder measure, and put it to the test! About the RCBS Uniflow III Here’s the information from the RCBS Uniflow III product page: The Uniflow-III Powder Measure is the most accurate […]

TESTED: Winchester StaBALL 6.5 Creedmoor-Class Powder

Finding the right powder for your load can involve compromises. Powder burn rate, metering, and temperature sensitivity are examples of variables that may translate to compromises based on your reloading equipment and load/cartridge. With newer powders like Winchester StaBALL 6.5, those compromises are becoming less of an issue. In this article, we’ll explore this recent […]

TESTED: NEW VihtaVuori N555 Creedmoor-Class Powder

Cartridges like 6.5 Creedmoor and 6mm Creedmoor have become incredibly popular to shoot and reload for. And for good reason! These cartridges offer great ballistics, minimal recoil, and outstanding accuracy. So when I found out about the new N555 Creedmoor-Class powder from Vihtavuori, I knew I had to try some. And that’s the subject of […]

TESTED: Starline 6mm Creedmoor Brass (Large and Small Primer)

Starline brass has performed really well for me, and 6mm Creedmoor is no exception! I’ve spent quite a while loading and shooting 6mm Creedmoor Starline brass with both large and small primer pockets, and in this article I’ll share both my first hand experiences AND a bunch of lab data quantifying the consistency and performance […]




Reloading Safety

Polls