Tag: .223 Remington

Page 1 of 6
1 2 3 6

NEW UR T-Shirts are In Stock!

Ultimate Reloader shirts are BACK IN STOCK, and we have a new design that’s also available for purchase NOW. You may want to buy both… What’s more, we now ship internationally (see full list below)! You can get these shirts right HERE! I Reload Therefore I Am T-Shirt Ultimate Reloader Class Gray T-Shirt Countries we […]

MY KS-47 BROKE: Here’s How I Fixed It

Part of owning and shooting firearms is the process of troubleshooting and fixing issues that arise “along the way”. I recently had an issue with my Palmetto State Armory KS-47 Hybrid AR chambered in 7.62x39mm– but nothing that couldn’t be easily fixed! This is the story of how I got this rifle “back in action”. […]

TESTED: 4D Reamer Rentals (Counterbore Lathe Job)

Have you ever had a one-off job that involved a special tool? How about when that tool can take months to get? That’s where tool rental RULES. And for gunsmithing tools (namely reamers) there’s a solution for that: it’s 4D Reamer Rentals at 4drentals.com! In this story, I used 4D Reamer Rentals for a one-off […]

Reloading 223 / 5.56 From A to Z

223 Remington and 5.56 NATO rifles span a wide variety of uses and scenarios. Reloading for 223 / 5.56 is very much worthwhile, but there are some special considerations to think about before you head to your reloading bench. We’ll cover the entire process from planning to loading in this story! 223 -vs- 5.56 Ammunition […]

NEW CMMG ZEROED Linear Compensator: Hands-On and In-Depth

CMMG just announced ZEROED- a lineup of muzzle accessories that currently includes linear compensators, and a 22 cal flash hider. In this story we’ll take a hands-on look at the ZEROED 9mm linear compensator! About ZEROED Here’s the summary from the CMMG ZEROED landing page: CMMG is kicking off the ZEROED Sub-Brand of accessories with […]

TESTED: Hornady 153 grain 6.5mm A-Tip Bullets

One of my favorite things to do is to test bullets. I’m not sure why it’s so satisfying, but it is! In this story, we’ll take an in-depth and hands-on look at Hornady’s 6.5mm 153 grain A-Tip bullets. About 156 grain 6.5mm A-Tip Bullets Hornady’s 153 grain 6.5mm A-Tip bullets are an ideal choice for […]

TESTED: Hodgdon Varget Smokeless Powder

There are some powders that are noteworthy for both their performance, and their versatility. When it comes to rifle powders, the first one that comes to my mind to fit these criteria is Hodgdon Varget. In this article, we’ll go “in-depth” with Varget, including a look under the microscope! Disclaimer Ultimate Reloader LLC / Making […]

COMPARED: Mark 7 Evolution + Mark 7 APEX 10 (All changes)

You may have seen the recent announcement for the new Mark 7 APEX 10 progressive reloading press. This press essentially is a [big] update to the Mark 7 Evolution. What exactly where the changes and improvements? I’m glad you asked! In this article I’ll explore these changes in detail from A to Z! Breakdown of […]

NEW Mark 7 APEX 10: Unboxing, Setup, Loading 45 ACP

Mark 7 just released a new 10-station progressive press called the APEX 10, and in this article, we’re going to get hands-on with it! About the Mark 7 APEX 10 The Mark 7 APEX 10 is available directly from Mark 7 Reloading, and also from the Double Alpha Academy. From the Mark 7 product page: […]

NEW: Pro Dies from Lyman (In-Depth)

Lyman has just recently released an all-new lineup of reloading dies aimed at high-volume progressive reloading: Lyman Pro Dies. These dies are meant for serious reloading, and are available in both pistol sets, and rifle sets. In this video and article, we’ll take a close look at the pistol Pro Dies! What’s Included: Pistol Pro […]

Mr. Bullet Feeder Caliber Change: 9mm to 45 ACP on Dillon XL-750

When you make an investment in a premium piece of gear like a Mr. Bullet Feeder, it’s good to know that you can use it for more than one application! In this video and article, I’ll walk through what’s included in the Mr. Bullet Feeder caliber conversion kits, and walk through the process of converting […]

WARP SPEED! Loading 9mm on the Dillon RL 1100 with Mr. Bullet Feeder

You all asked for it, and here it is! A follow-up to the Dillon RL 1100 Unboxing / Overview / Loading 9mm story– this time with a powder check and bullet feeder added to speed things up. All I can say is: mission accomplished! Let’s Load Up the Stations! Quick Review: RL 1100 Stations as […]

LOW-BUDGET RPR Accurizing: Amazing Results (6.5 Creedmoor)

Have you ever looked at a rifle and thought: I think this rig is capable of “more”. That’s what I thought recently when looking at my Ruger Precision Rifle chambered in 6.5 Creedmoor. It’s been a consistent ~0.6 MOA rifle with a variety of quality ammunition and handloads, but I was not satisfied with those […]

NEW! Dillon RL 1100 Unboxing, Setup, Loading 9mm

2020 has been a CRAZY year for the reloading industry, and that has caused some shortages and delays for components and equipment. And that was the case with the new Dillon RL 1100 reloading press. It’s taken a while longer to get ahold of compared to what I planned, but it has been worth the […]

Insane! Loading 223 / 5.56 with the Mark 7 Evolution + Mr. Bullet Feeder

I’m back at it with the Mark 7 Evolution 10-station progressive reloading press! In case you’ve missed the previous stories, you can check them out here: Mark 7 Evolution: Unboxing, Overview, Setup, Loading 9mm Mr. Bullet Feeder: Unboxing, Setup, Loading 9mm Mark 7 Evolution Caliber Change 9mm to 223 This time I’ll be picking up […]

Hands-On: Lyman Case Prep Xpress

The Lyman Case Prep Xpress is one of the most popular motorized case prep tools out there- and in this article, I’m going to get hands-on with this machine! What’s In the Box The Lyman Case Prep Xpress is a fully-featured case prep solution. In the above image, you can see clockwise from top-left: Power […]

Quick Look: Hornady Lock-N-Load Case Prep Trio

Looking for  a versatile-yet-affordable case prep tool? The Hornady Lock-N-Load Case Prep Trio could be the solution, and that’s the topic of this article! What’s In the Box The Case Prep Trio comes with the following: Case Prep Trio power head (power switch and DC socket are on back of unit) Power adapter (USA plug […]

Mr. Bullet Feeder: Unboxing, Setup, Loading 9mm

High-volume loading is all about optimizing the process. If you want high throughput,  you can’t afford to have any “bottlenecks” in your reloading workflow. And that’s where a bullet feeder comes in handy! In this article, I’ll continue where I left off (see Mark 7 Evolution Overview/Setup) with my Mark  7 Evolution “boot up”. This […]

Mark 7 Evolution: Unboxing, Overview, Setup, Loading 9mm

The time is FINALLY here! My Mark 7 Evolution press arrived this week, and that means it’s time for me to kick off a series of content showing this amazing machine from A-Z. We’ll start in this article with an unboxing, and also cover setup and loading of 9mm parabellum. Following this story, I’ll get […]

Dillon XL-650 VS XL-750: Differences Explained

Dillon just released the XL-750: an updated version of their popular 5-station XL-650 press (see my complete overview of the XL-750 HERE). If you have a Dillon XL-650, you may be wondering exactly what all of the differences are between the XL-650 and the XL-750. I’ll cover all of that in this article! Summary of […]

My Suppressor Tax Stamp Nightmare Is Finally OVER!

Have you ever had an experience that was so frustrating it just about drove you to your wits’ end? Here’s the definition for that phrase: At wits’ end The idiom at wits’ end means to be very upset, or at the limits of one’s emotional or mental limitations. That pretty much describes how I felt […]

Overview: Mark 7 Autodrive for Dillon XL-750 and XL-650 Reloading Presses

Dillon is known for equipment that’s well suited for high-volume reloading. That’s why a lot of pistol competitors use Dillon equipment to load match ammo. Sometimes these competitors load literally thousands of rounds per month. And that that rate, you start to look for ways to increase speed and efficiency. One of the ways to […]

High Tech Reloading: Mark 7 Evolution and Revolution detailed walkthrough

When I first saw Mark 7 Reloading equipment at the 2018 SHOT Show, my jaw dropped to the floor. “Wow” I thought to myself- an advancement of reloading technology on both the mechanical side and with numerous sensors and automation to boot. 10 stations- are you kidding? This is just the kind of technology that […]

A Discussion with Starline at SHOT Show 2019

As you all know, I shoot a LOT of Starline brass! And this year while at the SHOT Show, I had the opportunity to talk brass with Starline’s Hunter Pilant! As I mentioned, I’ll have a lot of cool stories this year featuring Starline brass including 6mm Creedmoor, 6.5 Grendel, 7.62x39mm, and more! So please […]

NEW! Frankford Arsenal M-Press: Unboxing and Complete Overview

There’s an all-new reloading press just about to hit the market, and it’s call the “M-Press” from Frankford Arsenal. In this post, I’m going to give you a complete preview of this press: from unboxing, to setup, to sizing and bullet seating for multiple rifle calibers, specification, and more. Frankford Arsenal is launching a ton […]

Page 1 of 6
1 2 3 6



Reloading Safety

Polls