We’ve previously featured Ultradyne’s UD7 chassis with Cerakote. This time, we’re looking at this chassis in its most compact form—the UD3. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
After bulk-processing .308 brass with the CP 2000 and DA 3000, we’re bulk loading tracers and subsonic rounds on the Dillon RL-550C. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical […]
Case preparation can take forever and you’re lucky if you find this monotonous process particularly fun. We’re automating it with the Dillon DA3000 and CP2000! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]
Using the correct case gauge can save a lot of time and prevent considerable headaches. Sheridan Engineering’s slotted gauge helped me solve a problem I was having with .300 Blackout. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]
Previously we showed how to set up the DA3000 with the CP2000 and convert 223/5.56 brass to 300 blackout. To load the new brass, we have the Dillon RL1100 set up to load 220 grain subsonic 300 blackout ammunition and some machine guns to test it with. This is going to be FUN! Disclaimer Ultimate […]
