Story by Guy Miner In case you didn’t already know — I’m beyond excited about my upcoming trip to Africa. I’ve already showcased load development for my 30-06 and threading the same rifle for a suppressor, but I’m also taking another rifle, a Ruger Number One 375 H&H. Disclaimer Ultimate Reloader LLC / Making with […]
Tag: Single Stage
Hands-On: Inline Fabrication Ergonomic Roller Handle
In terms of reloading press ergonomics, the handle is one of the most important parts. Ensuring comfortable and consistent strokes is key to good ammo and an enjoyable experience. Inline Fabrication has a line of ERGO Roller Handles for a variety of presses to assist with this! Disclaimer Ultimate Reloader LLC / Making with Metal […]
30-30 Subsonic Loads with Berry’s 150gr Plated Bullets!
A lever gun isn’t always something you’d think of as subsonic. Just for fun, we loaded the 30-30 Winchester to subsonic velocity for plinking. This cartridge is already fun to load and shoot anyway — these loads make it even more fun. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article […]
INSANE Precision: 223 Loads using Forster Equipment
Knowing how accurate the 223 trainer rifle Gavin built is, especially when combined with Berger’s factory 77 grain OTM ammo and Travis’ handloads, it seemed natural to also build that same load using Forster’s unique Co-Ax press and associated equipment. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]
TESTED: Hodgdon’s CFE Pistol Smokeless Powder
If you’re looking for a versatile powder for revolvers or semi-auto handguns, CFE Pistol certainly deserves your attention. That’s the powder that’s front and center in this story! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]
EXTREME Powder Temperature Testing: Varget -vs- TAC
Temperature affects powder and velocity— but how much? Take a look at our extreme temperature testing for answers. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other […]
HANDS-ON: RCBS Turret Press
The RCBS Turret Press is a 6-station cast iron press with on-press priming. Interested to see the press in action? That’s what we’ll cover in this story! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]
Loading the 25-06 Hunting Loads with the MEC Marksman Press
We’re going step-by-step on how to handload reliable and accurate 25-06 hunting cartridges on the MEC Marksman single stage press. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
TESTED: Hodgdon Retumbo
If you’re loading magnum cartridges, you may be familiar with Hodgdon’s overbore cartridge powder — Retumbo. To learn more, read on and watch the video! About Hodgdon’s Retumbo From the manufacturer’s product page: This magnum, extruded powder was designed expressly for the really large overbore cartridges such as the 7mm Remington Ultra Magnum, 300 Remington […]
Lyman Gen 6 – Compact Touch Screen Powder System
Included in the Lyman Ultimate Reloading System is the Gen6 Touch Screen Powder System. You asked for more info about that and here it is! About the Lyman Gen 6 Compact Touch Screen Powder System Lyman has been making electronic powder measures since 1995. They listened to what their customers wanted and have introduced this […]
Lyman ULTIMATE Reloading System – Unboxing and Overview!
In this story, we take a look at what’s included with Lyman’s “Ultimate Reloading System” kit. Oh, and we also give Guy Miner some homework using this setup! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this website (including […]
CAVEMAN Reloading (No Press Required)
This article was written by Guy Miner The compact and inexpensive Lee Loader has been available for decades. I still have the two I bought in the 1970’s when I had little money or space for handloading. In contrast to some of the advanced loading equipment seen here on Ultimate Reloader I thought It would […]
30-30 in the 21st Century?
This article was written by Guy Miner Is the 30-30 lever action rifle still a worthy hunting rifle in the 21st Century? Oh my goodness yes! I do love my lever action rifles, and in this story I’ll both expose Gavin to the lever action 30-30 *and* walk through the reloading process as well. Let’s […]
High-Velocity 7mm Rem Mag Loads with IMR Enduron Powders
7mm Rem Mag is a VERY popular hunting cartridge, and for good reasons! With this cartridge you get more velocity compared to 300 Win Mag, and less recoil as well. With enough power to stop almost any game animal in North America, it’s hard to go wrong with this powerful “platform”. In this article, we’ll […]
Budget Reloading with Lyman Gear
This article was written by Guy Miner. Here on Ultimate Reloader we showcase some very sophisticated, high end handloading equipment. But, do all reloaders need such expensive gear? Guy say’s no. That’s right – I’m primarily a hunter these days and am content loading about 50 cartridges for each of the rifles my son and […]
Is 30-06 Boring for Big Game Hunting? (Results)
Written by Guy Miner I often hear from other hunters that they don’t like the 30-06 cartridge because it’s “boring.” Well, they must have a different definition of the word, for I find it to be an exemplary hunting cartridge with an impressive track record. Leaving out the two world wars, Korea, some of Vietnam […]
NEW DAA Mini Case Feeder for the Dillon RL550
The Double Alpha Academy just released their new affordable mini case feed system for the Dillon RL550, and in this story I’ll show you how it works! About the DAA RL550 Mini Case Feeder From the Double Alpha Academy product page: The DAA 550 Mini Case Feeder will greatly improve the efficiency of your Dillon 550 […]
45-70: Intro to Reloading and Shooting (Marlin 1895 Lever Gun)
Written by contributing author, Guy Miner. In this story, Gavin introduces Guy to the MEC Marksman press! Guy introduces Gavin to the Marlin 1895 rifle and the 45-70 cartridge. It was quite a change using a blunt nose 350 grain rifle bullet. The rifle and cartridge have been in use for a long time and […]
9mm Brass is IN STOCK at Creedmoor Sports (Limited Time)
For a limited time, Creedmoor Sports has a special shipment of 9mm Parabellum brass in stock! Rare Opportunity You may not know about Lapua pistol brass, and that’s because the majority of this brass gets sold in Europe for both military and law enforcement agencies/entities. Creedmoor Sports had a rare opportunity to buy up a […]
RCBS Summit Press: Unboxing, Setup, Overview, Loading 6.5 Creedmoor
There are a lot of reloading presses out there that look the same, work the same, and are essentially “variations on a theme”. And then there’s the RCBS Summit– a press that literally turns the concept of the single stage reloading press on its head! Why? Because instead of moving the cartridge and shellholder, it […]
First Look: Brass Smith Victory Press from Lyman
Here it is! The last in a line-up of three unboxing and setup videos covering all of the new Brass Smith reloading presses from Lyman. This story is all about the Lyman Brass Smith Victory Single Stage press with on-press priming. Be sure to check out the Brass Smith Ideal and Brass Smith All American […]
MEC Marksman Single-Stage: Unboxing, Overview, Setup
There’s nothing like a solid piece of iron. Cast iron tools and machines are a lifetime investment, and I love it when I look at a tool and see “Made in USA”. Recently MEC (the Mayville Engineering Company) made an interesting announcement. This company which is known for top-notch shotshell reloading gear announced they are getting into […]
AR-MPR: Phase II Kick-Off
Now that we’ve build and function checked the AR-MPR rifle (See Brownells Videos for Complete Details), it’s time to move from Phase I (Build) to Phase II – Precision Loading and Rifle Accurizing/Tuning. This rifle has already proven that it’s capable of meeting the original accuracy goal of .5 – .75 MOA (See Range Report […]
