Tag: TL-1660

Page 1 of 2
1 2

Tikka T3x Chassis Upgrade: Ultradyne UD5 & Bix’n Andy Dakota Trigger

My viewers have been asking for Tikka T3x content for years— this Ultradyne UD5 chassis upgrade is chapter one!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and […]

NEW Precision Matthews PM-1440HVT-2 Lathe In-Depth Hands-On Overview

Back in November, I set up the Precision Matthews PM -1440-HVT-2 at Precision Rifle Concepts, promising an in-depth overview once I spent some time with it. That time has come!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

Part 3: 7 PRCW Bedding and Break In

Ever since I met Erik Cortina, I’ve been curious about F-Class. It’s finally time to shoot my very own 7 PRCW! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]

Setting Up the Precision Matthews PM-1440HVT-2 Lathe

Manual machinery has always interested me. I’ve used the Precision Matthews PM-949TV Precision Mill, PM-1440GT, and TL-1660 on a variety of projects and they’ve served me well. While I still use these lathes, I needed something more—enter the PM-1440HVT-2. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]

7 PRCW Build Part 2: EC Tuner V2 Machining/Install

I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2!  *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]

7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering

Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]

Loading Precision .338 with Triebel Dies

It’s incredibly rewarding to build a rifle, load the ammo for it, and shoot it to measure the results. I decided to take out the .338 Lapua Freedom Rifle and do some load development with it.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]

Threading a THIN Sporter Barrel for a Suppressor (30-06 Example)

That barrel is too thin to thread! I’ve heard that said multiple times, and I’ve even said it myself. So what do you do when you want to put a suppressor on your sporter rifle, and don’t have enough “meat” on your barrel? I’ll cover that in this story! Be sure to check out my […]

Re-creating Berger’s AMAZING 77 OTM 223 Load

The 223 trainer build we completed here on Ultimate Reloader is a one hole shooter with the factory loads from Berger: The Berger Match Grade 77gr OTM Tactical loads that is! In this story we’ll try and duplicate this load from some reverse-engineering and with some shooting. This will be fun! Disclaimer Ultimate Reloader LLC […]

Page 1 of 2
1 2