Category: Barnes Bullets

Less is More? Using a SMALLER Cartridge for Grizzly, Why? (30-06 vs 375 H&H)

I had long wanted to hunt grizzly in Alaska, and finally saved enough to pay for the hunt. There’s a lot to consider when contemplating a grizzly hunt, from the gun to the cartridge, terrain, and location!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you […]

Rock Chucker Supreme Master Reloading Kit

I thoroughly enjoyed looking over the items in this Rock Chucker Supreme Master Reloading Kit and putting them to work. My familiarity with RCBS gear dates back to the 1970s with my father’s RCBS press. In the mid-1980s, I bought my own Rock Chucker press which I still use 40 years later!  Disclaimer Ultimate Reloader […]

Deer Rifles: It Doesn’t Take a Cannon

Deer, whether whitetail, blacktail or mule deer, are not huge animals. A big mature buck is rarely over 300 pounds and most are far smaller. They’re also really not very wide from side to side, have smallish bones and their hide isn’t particularly tough. This begs the question: Why do I hear deer hunters so […]

PNW Spring Bear Hunt (45-70 and 7mm PRC)

The rain was pouring down. Lightning and thunder filled the sky. My blind on a steep slope in the Bitterroot Mountains had no roof and was becoming seriously wet. I was in the last few hours of my week-long hunt and hadn’t yet seen a bear. Despite the miserable weather, I remained dry in my […]

TESTED: Barnes 130 grain 30 Caliber TTSX Bullets

A 130 grain hunting bullet in .30 caliber? Yes, these bullets are screamers and accurate as well! Another well-regarded hunting bullet from our friends at Barnes Bullets.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

.308 Shorty Chronograph Data Comparison: 16″ vs 24″ Barrels!

A short while ago, we asked for input on our .308 build. Overwhelmingly, you all wanted a 16” barrel, so “Shorty” was born! Looking to compare velocities, I brought out my match .308 with a 24” barrel to compare the results with some Hodgdon pistol data! (Yes, .308 Pistol data.)  Disclaimer Ultimate Reloader LLC / […]

Basic Rifle Reloading 5: Bullet Seating & Crimping

At this point we have cleaned and lubed the brass, resized it, primed it and dropped in the powder charge. It’s time to seat the bullet!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]

Basic Rifle Reloading Part 4: Powder Charging

To this point we’ve cleaned, resized, trimmed, and primed our rifle brass. Now it’s time to charge it with smokeless powder! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]

25-06 Mule Deer Barnes TSX Hunting Success

I first heard about Barnes bullets in the 1980s and by the 1990s, they were well-known and renowned for hunting. Copper bullets are different than lead core bullets. They want to go fast and penetrate hard, but are a different kind of bullet. It’s important to be conscious of  this whenever changing your load from […]

For Commerical Inquiries:
Ulitmate Reloader Commercial Services



Reloading Safety

Polls