Tag: 300 PRC

Page 1 of 3
1 2 3

TESTED: Bergara B-14 Wilderness HMR in 6.5 PRC

Bergara rifles have seen a drastic increase in popularity in the last few years, and for good reason. Precision, features, quality, and value are all strong points, and that’s certainly true of the rifle I’ll be covering in this article. It’s the Bergara B-14 HMR Wilderness– a rifle equally fit for long-range shooting and hunting. […]

6mm ARC: Fact or Fiction? Real Performance Results, From-Scratch Experimental Load Development

6mm ARC is so new that as of the writing of this article, published load data did not exist! But I wanted to get some real-world results with my new CMMG Endeavor 300 6mm ARC AR-15 published as soon as I could, and therefore embarked on an exciting journey. And that’s the subject of this […]

NEW 6mm ARC: What it is, Announcements, What Should I Show?

Today Hornady introduced a new rifle for the AR-15 platform called 6mm ARC (Advanced Rifle Cartridge). In this post, I’ll summarize what I know about this new cartridge, help to make an industry announcement, talk about my plans with 6mm ARC, and request your thoughts and input for content ideas! 6mm ARC is HERE! 6mm […]

TESTED: New 205gr 30-Cal Elite Hunter Bullets from Berger

Berger has been busy developing and releasing new bullets, continuing to innovate in popular long range categories. I recently had the privilege to get my hands on some pre-release sample bullets for one of the exciting new bullets Berger is releasing: the Berger 30 Caliber 205 Grain Elite Hunter bullet, all-new for Spring 2020. In […]

300 PRC Budget Build part 2: Barrel and Stock Work, Break-In

This “300 PRC Budget Build” has been one of my favorite builds so far, and a perfect follow-on to taking Gordy Gritters’ Precision Rifle Building Class. I used this build as an opportunity to take on some new challenges, and to see what I could do with a factory Remington 700 rifle. If you haven’t […]

Loading 6.5 PRC with MEC Metallic Gear End-To-End

It’s time to start loading some 6.5 PRC, and I thought this would be a great opportunity to showcase the MEC Metallic lineup of reloading gear! In this post, I’ll show some MEC gear I haven’t shown yet, and walk through the end-to-end process of reloading 6.5 PRC in the video below. Let’s get to […]

SHOT Show 2020: Jason Hornady Interview

As an enthusiast of a paticular product, have you ever wondered: who are the people behind this company, this brand, and this product? One of my favorite things about my job is when I have the opportunity to get to know someone that’s been influential in my industry. At the 2020 SHOT Show, I had […]

6.5 PRC Light-Weight Build Part 3: Bedding the Action to the Stock

The 6.5 PRC light-weight build is all done except some cosmetic finishing touches, and it’s shooting AWESOME! (see this post from the first range trip). In this post, I’ll pick up where we left off at the end of the barrel work and stock fitting article/video, and I’ll cover epoxy bedding the barreled action to […]

Page 1 of 3
1 2 3
Become a Patron!



Ultimate Reloader on Instagram

Reloading Safety

Polls

Contact Ultimate Reloader

Contact ultimate reloader by clicking here.