I recently took apart Jim Harmer’s troublesome Mossberg Patriot just to take a look. I agreed it was the worst-performing bolt-action rifle I’d ever fired. Since then, I got to work and completely transformed it! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these […]
Ever dream of chambering your own rifle barrels? Not just barrels, but benchrest-quality barrels capable of incredible precision? In this video, brought to you by the Colorado School of Trades and OTM Tactical, I walk through the equipment, machinery, training, and investment you’ll need to do just that! (Use code UR5 to save 5% on […]
I recently pushed the limits of .308 Winchester using Alpha Munitions OCD brass. Details of the brass, reloading process, and the rifle’s chamber all have to come together perfectly for safe, proper firing. Here’s how it works! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you […]
We’ve shown a tour of the Colorado School of Trades as well as covered their programs. This time, I’m talking to the students to get their first-hand experiences! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]
I’ve learned a tremendous amount from Gordy Gritters. I’ve not only attended his precision rifle building class at the Extreme Accuracy Institute but relied on him for advice as I’ve started Precision Rifle Concepts. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). […]
I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2! *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
I’ve installed a number of barrels on actions over the years. Today I’m highlighting some of the tools, processes, and tips and tricks. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, […]
We’ve just on-boarded a new gunsmithing school partner, the Colorado School of Trades (CST)! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration […]
