Tag: CCI

Page 1 of 4
1 2 3 4

NEW: Sierra 145 Gr. 6.5mm Tipped GameKing

I started using Sierra Bullets in the 1970s and I’ve always found them accurate and reliable. I’ve used them for competition, on SWAT, and hunting both varmints and big game. I shot out several .308 Winchester barrels at around 6,000 rounds each with .30 caliber 155 and 168 grain Sierra MatchKing bullets. For varmint and […]

10 Must-Know Reloading Hacks

I took some time to write down the top 10 things I believe reloaders should know. Let’s get started!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and […]

Head to Head: .44 Russian vs. .44 Special vs. .44 Magnum

Have you ever wondered how the .44 Russian, .44 Special, and .44 Magnum compare?  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration […]

Optimizing Bullet Feed: X-10 Progressive 9mm Loading

Frankford Arsenal’s X-10 sports lots of room for a variety of dies and checks. Rather than process brass in one sequence and load in another, today I’m making use of the X-10’s many stations for an end-to-end process. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content […]

TESTED: RCBS Universal Hand Priming Tool

Tired of having the incorrect shellholder for your hand primer? Ever have a shellholder go missing at the most inopportune time? The RCBS Universal Hand Priming tool eliminates the need for shellholders!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content […]

TESTED: Accurate MAGPRO Smokeless Powder

I’ve got an elk hunt quickly approaching and need a powerful and flat-shooting magnum. Let’s take a look at what’s a good powder for that!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]

Improve Your Die Setup: Lock Rings & Loading Full Progressive .308 on the X-10

We’ve been shooting a lot of .308 lately —in fact —we are out! We need to crank out a ton more, so this was a great time to set up a progressive press. I’ve been working with the Frankford Arsenal X-10 lately. Along the way, I’ve come across some notable gear like the Frankford Arsenal […]

Automated Bulk .223 Loading on the Mark 7 Apex 10

Bulk processing over 40,000 .223 cases from Mojo Precision on the Mark 7 Apex 10 was just the start of the process. We decapped using FW Arms dies and Berdan Sentry, resized with the Lyman carbide pro die, and trimmed with the Mark 7 Power Trim Xpress. We decided to run a dedicated priming session […]

Mark 7 Apex 10 Primer Xpress

Mark 7 has made some strides with their Apex 10 Gen 2 upgrades including a new priming system and billet toolhead. We’re taking it one step further by adding the Mark 7 Primer Xpress!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). […]

Page 1 of 4
1 2 3 4