Tag: Area 419 Loading Block

Page 1 of 2
1 2

Reload Faster: NEW RCBS MatchMaster Powder Funnel Kit

Have you ever been curious if there was a faster way? In this video we test the new RCBS MatchMaster Funnel Kit and compare it to a few other funnels!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

TESTED: Bullet Central Micron Dies

Everything I do is about precision, from building rifles to reloading. Today I’m testing the Micron Precision series of dies from Bullet Central! (Use the code URMICRON15 to save 15%!) Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

New Load Development Key: 6.5 Creedmoor with Triebel Dies

I’ve always known that load development matters, but I recently had a fundamental change in my load development philosophy. I’m going to show this with concrete results as I load precision 6.5 Creedmoor ammunition on the Area 419 ZERO press with Triebel dies from Creedmoor Sports.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

Loading Precision 6mm x 47 with Triebel Dies

I’ve been eagerly waiting for Triebel dies to load for my 6mm x 47 Lapua BAT Hammerhead build. They’ve finally arrived and I’ve developed a great recipe. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

DON’T TRY THIS: Pushing 6GT to the MAX (Alpha Munitions, Bat Machine)

We previously pushed the limits of Alpha Munitions .308 brass and BAT Machine’s Ignitor action. Do NOT try this at home, but our curiosity has led Bruce Thom and me to explore the limits of 6 GT with Alpha Munitions brass and the BAT TR action.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

Forster .280 AI Loading Tips & Tricks

In my last video, I showed the full process of my .280 AI lightweight hunting rifle build from bill of materials to chambering on the Precision Matthews PM-1440HVT-2. I loaded test ammunition with three different bullets, the process and results of which are detailed below!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by […]

Alpha .308 Torture Test: How Many Firings On A Single Piece Of Brass?

Just how many firings can you get out of a single piece of brass? We’ve already put Alpha Munitions OCD brass through the ringer, pushing .308 Win to .300 Win Mag levels. This time, we’re torture testing it again to find its breaking point!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading […]

Avoid the Clickers: Correctness Formula

I recently pushed the limits of .308 Winchester using Alpha Munitions OCD brass. Details of the brass, reloading process, and the rifle’s chamber all have to come together perfectly for safe, proper firing. Here’s how it works!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you […]

INSANE Performance: Pushing the 308 Win into 300 Win Mag Territory (Bat Machine, Alpha Munitions)

DO NOT TRY THIS AT HOME. I’ve joined forces with BAT Machine and Alpha Munitions to truly test how hard we can push a .308 Winchester.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]

Page 1 of 2
1 2