Last year I was unable to find my old favorite slow burning powders locally, but I found a couple of pounds of IMR 8133 and decided to investigate. Since then, I’ve become a fan of this powder, which we’ll take a close look at in this story! Disclaimer Ultimate Reloader LLC / Making with Metal […]
Category: 300 PRC
TESTED: MDT Gen 2 CKYE-POD Triple Pull
I’ve been a fan and user of the MDT CKYE-POD since it first came out and have been desperate to test the MDT Gen 2 CKYE Triple-Pull Bipod. Here we take a closer look at its capabilities for both small and large calibers. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this […]
300 PRC Budget Build part 1: Action Blueprinting
I’m excited to kick off my 300 PRC “Budget Build” in this article. I’ve been working on putting together all of the related pieces and parts, have taken training with Gordy Gritters, and have previously completed a 300 PRC full-custom build, and now it’s time for the 2nd 300 PRC build! In this story I’ll […]
300 PRC Precision Loads Step by Step
300 PRC is a precision long-range cartridge and shooting platform. And when precision counts, the reloading process and capability becomes super-important. Match-grade loads can make the difference between a hit and a miss when you’re stretching out to 1000 or even 2000+ yards. In this article I’ll give you a complete walk-through of my current […]
300 PRC Initial Load Development: 225 grain ELD-M and Ramshot Magnum
Yes it’s tedious, and yet it takes a lot of time, but I really enjoy load development! And this time with 300 PRC, I’ll have two nearly identical barrels to perform load development with. Both are match-grade barrels from Benchmark! One will be 1:9.5 twist (the custom 300 PRC used in this article), and the […]
300 PRC Custom Build: Benchmark Tactical Brake Machining and Install
When you’re talking magnum calibers, a brake is one of the best investments you can make! Sure, the guys shooting next to you may not like it, but it’s a GREAT way to take the edge off heavy recoiling rifles and cartridges. Benchmark is known for world-record-setting barrels- but they also make muzzle brakes! In […]
300 PRC Custom Build: Chambering and Machining the Barrel
For any precision-oriented rifle, the chambering work is absolutely critical. Having a chamber with smooth walls, proper headspace, and correct alignment is an absolute requirement when maximum precision is the goal. In this article, I’ll outline the chambering and machining work I did for my full-custom 300 PRC rifle build. I did things a bit […]
300 PRC Custom Build Overview
It’s taken a lot of planning and preparation, but now it’s time! It’s time for the most in-depth rifle build I’ve ever taken on: my 300 PRC full-custom. This will be a rifle that I can reach further with, and every detail will be exactly what I want for maximum precision and accuracy. So in […]
In-Depth PRC Series: 6.5 PRC, 300 PRC End-To-End (Kick-Off)
I’m very excited to announce the start of a content series that will explore 300 PRC and 6.5 PRC in-depth! Since these cartridges were announced, I’ve wanted to get hands on with both of them, and now is the time! In this series, I’ll be exploring 300 PRC and 6.5 PRC from start to finish, […]
