Tag: Remington 700

BAT Rifle Actions: In-Depth Overview

If you are familiar with Bat Machine, you know they have a reputation for extreme accuracy. What you may not know is just how many different types of rifle actions they make, and how many configurations and options are available. In this video and article, I’m joined by Bruce Thom from Bat machine to cover […]

How It’s Made: Bat Custom Rifle Actions

Have you ever wondered how a custom rifle action is machined and assembled? I certainly have, and in this article (and video) I’ll take you on a tour of the shop at Bat Machine in Post Falls Idaho and in the process show you how they build world record setting rifle actions! About Bat Machine […]

300 PRC Budget Build part 2: Barrel and Stock Work, Break-In

This “300 PRC Budget Build” has been one of my favorite builds so far, and a perfect follow-on to taking Gordy Gritters’ Precision Rifle Building Class. I used this build as an opportunity to take on some new challenges, and to see what I could do with a factory Remington 700 rifle. If you haven’t […]

Results: 224 Valkyrie Starline Brass Torture Test

Reloading 224 Valkyrie is pretty much the same as reloading most other bottleneck rifle cartridges. However, there are some unique considerations when you’re dealing with a “hotrod” magnum cartridge like 224 Valkyrie. One of these considerations is brass life/longevity- namely the primer pockets. I’ve heard a lot of stories of 224 Valkyrie brass only lasting […]

224 Valkyrie: Hornady 88 grain ELD-M Load Development Success

224 Valkyrie is all about pushing heavy high-BC bullets to crazy-long ranges with an AR-15, or even a bolt gun. For 224 Valkyrie, I started working with a mid-weight bullets (Nosler 70 grain RDF), and have been working my way up in weight- and hope to top out at about 95 grains. While the Nosler […]

224 Valkyrie at 600 Yards: Bolt -vs- AR with Unexpected Results

Do you ever get tired of shooting paper targets? I know I do! Sure, the engineer in me loves to shoot groups, analyze chronograph data, and “hone things in” – but there’s got to be a “purpose” for shooting, and my purpose extends well beyond punching holes in paper. And that’s where a good range […]

TriggerTech Special Remington 700 Drop-In Trigger In-Depth Overview

I’m really liking the custom Remington 700 rifle I built chambered in 224 Valkyrie. One of my favorite things about this rifle is the trigger, a TriggerTech Special drop-in for the Remington 700. If you haven’t already, you’ll want to check out the post and video where I installed the TriggerTech Special, and the KRG […]

224 Valkyrie Remington 700 Build P8: Barrel Break In, First Groups, First Loads

Breaking in the barrel for a rifle you’ve built is a truly unique and exciting experience. Will the gun blow up? Will the rifle shoot well? Will my new trigger meet my expectations? It’s like sea trials for a new ship, but with a precision instrument. As I was finishing my Remington 700 224 Valkyrie […]

224 Valkyrie Remington 700 Build P7: AICS Magazine Conversion

When you go “off the script” (like building a 224 Valkyrie bolt-action rifle) you can expect some challenges. One such challenge with this kind of build is getting a reliable magazine configuration setup. A lot of guys have spent a lot of hours tinkering with magazines, springs, followers, lip geometry and more with a common […]

224 Valkyrie Remington 700 Build P6: KRG Bravo Stock, TriggerTech Special Trigger

All of the hard work I’ve put into this 224 Valkyrie Remington 700 build is about to come together, literally! With a complete barreled action assembly, it’s time to install our trigger, and then mate the stock and barreled action together. I can hardly wait to take this rifle to the range! And by the […]

224 Valkyrie Remington 700 Build P5: Custom Thread Protector

A threaded muzzle is great, but if you aren’t using a muzzle brake or suppressor, you’ll need something to protect the (fragile) threads! That’s where a thread protector comes in handy. One of the best ways to make a thread protector is with a cut-down section of barrel blank. Good thing I had this “extra” […]

224 Valkyrie Remington 700 Build P4: Muzzle Threading and Barrel Install

Here’s my philosophy: why not have a threaded muzzle? If you want to use a muzzle brake or a suppressor, you’re all set! If you don’t use a muzzle device, you put a thread protector on, and you’re good to go. So now that we’ve completed the breech-end barrel work, let’s move on to the […]

224 Valkyrie Remington 700 Build P3: Chambering and Machining

Sometimes you have to do a lot of “prep work” to get to the “fun work”. Well, after building out our build-sheet, and preparing and aligning the barrel, we’re now to the fun part of this build! That’s right, it’s time to start machining the tenon, and cutting the chamber! Series navigation: 224 Valkyrie Remington […]

224 Valkyrie Remington 700 Build P2: Barrel Prep and Alignment In the Lathe

How you secure your barrel in your lathe, and the attention to detail aligning the barrel’s bore to the lathe spindle axis will both have a big effect on the outcome of your barreling work. In this post, we’ll continue our 224 Valkyrie Remington 700 bolt-action rifle build with a focus on a few things: […]

224 Valkyrie Remington 700 Build P1: Planning the Build

I’ve always wanted to build a Remington 700 custom bolt-action rifle, and now is the time! As a part of the lager 224 Valkyrie project (two rifle builds, reloading, ballistics, …) this smaller collection of videos and articles will outline a complete Remington 700 build- from start to finish! Later, we’ll compare ballistics and accuracy […]

Hornady Lock-N-Load Iron Press Kit: Mounting and Setup

I’ll admit, I’m having a hard time being patient when it comes to getting started with the Hornady Lock-N-Load Iron Press. The arrival of this press is great in its timing: I’m just about to move from progressive loading of 6.5 Creedmoor (for the Ruger Precision Rifle) to single-stage precision reloading. This will be the […]




Reloading Safety

Polls