Tag: 6 GT

Henderson V3 Case Trimmer: Unboxing, Overview, Setup, Trimming

I’ve recently partnered with Henderson Precision and have been very impressed with their Gen 3 power case trimmer. In this story I’ll cover unboxing, overview, setup, and trimming some 6 Dasher brass! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content […]

Ultra-Light Weight: MDT HNT 26 Chassis (6.5 PRC)

When I saw the MDT HNT26 Ultra-Light-Weight hunting chassis at SHOT show this year, I couldn’t believe how light it was! I finally got my hands on this lightweight chassis system, so in this story we are going to get it set up with the ultra lightweight 6.5 PRC, and put it to work! Disclaimer […]

Quick Look: Hawkins Precision M5 DBM Bottom Metal

One thing that’s easy to overlook with your rifle build is one of the most important: the bottom metal. In order to ensure proper feeding and magazine compatibility, the bottom metal is critical. In this story we’ll look at a top-shelf option: The Hawkins Precision M5 DBM Bottom Metal. About Hawkins Precision Hawkins Precision makes […]

INSANE Precision: 223 Loads using Forster Equipment

Knowing how accurate the 223 trainer rifle Gavin built is, especially when combined with Berger’s factory 77 grain OTM ammo and Travis’ handloads, it seemed natural to also build that same load using Forster’s unique Co-Ax press and associated equipment.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]

INSANE 6.5 Creedmoor PRS Rifle Build (Bat + Foundation + Hawkins Precision)

There are few things in life that bring me more satisfaction than building ultra-precision custom rifles! In this story, I’ll share my latest build: a tack-driver PRS build with Bat TR Action, Foundation Genesis 2 stock, and Hawkins Precision M5 DBM bottom metal! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this […]

HANDS-ON: RCBS Turret Press

The RCBS Turret Press is a 6-station cast iron press with on-press priming. Interested to see the press in action? That’s what we’ll cover in this story!   Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]

TESTED: Hornady Sub-X 190gr 300 Blackout

Hornady’s SUB-X bullets are optimized for expansion at subsonic velocities. How well will these bullets perform for 300 AAC Blackout? That’s the question we’ll answer in this story! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this website (including […]

22GT Ultra-Light Weight Build (Start to Finish)

Ever since I heard about the 22GT I thought to myself: I need to build one of these! And that’s exactly what I’m going to cover in this story- my ultra-light-weight 22GT build start to finish. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]

NEW: Bergara MGLite 6.5 Creedmoor with CURE Carbon Barrel

Today Bergara announced a new carbon technology called “CURE”. As a part of this announcement, Bergara has debuted a new ultralight rifle called “MGLite” that features a  CURE carbon barrel! In this story, we’ll get hands-on with the MG Lite chambered in 6.5 Creedmoor. *Correction- the 20 MOA picatinny scope rail shown in this video […]

6.5x47mm BR Build Part 2: Custom Stock Work

In this story, I’ll pick up where we left off with barrel work. This time I’ll show barrel channel and receiver inletting, machining custom pillars, bedding, trigger guard installation, and profiling. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this […]

For Commerical Inquiries:
Ulitmate Reloader Commercial Services



Reloading Safety

Polls