Tag: NRL

HANDS-ON: NEW AMP Press from Annealing Made Perfect

It’s HERE! The AMP Press from Annealing Made Perfect allows you to profile bullet seating force when seating bullets. This capability will help you validate and increase the consistency of your ammunition, and that will help you get on target. In this story, we’ll get hands-on and put this machine through its paces! About the […]

TESTED: NEW EC Tuner Brake

Many of you in the Precision Rifle community have seen the new Patent Pending EC Tuner Brake from Erik Cortina, and have probably been thinking: “Does it work?”. In this story, we’ll find out by testing the EC Tuner Brake with three different rifles, with factory ammunition, and with handloaded ammunition. About the EC Tuner […]

Reloading 223 / 5.56 From A to Z

223 Remington and 5.56 NATO rifles span a wide variety of uses and scenarios. Reloading for 223 / 5.56 is very much worthwhile, but there are some special considerations to think about before you head to your reloading bench. We’ll cover the entire process from planning to loading in this story! 223 -vs- 5.56 Ammunition […]

5 Shots, One Hole: 6 Dasher Load Development Initial Results

Load development is a critical pathway that leads to “great things” for those of us that are obsessed with precision and accuracy. What’s difficult about load development is how time consuming it can be. Variables include brand of brass, powder type, powder charge, primer type, bullet type, bullet seating depth, and more. If you multiply […]

NEW Expanding Mandrel Die from L.E. Wilson

I do a lot of shooting with loads using brand new brass. And the results can be downright impressive! One challenge I’ve had with loading new brass (a frequent issue) is excessive neck tension. New brass necks tend to come a tad undersize (0.001″-ish). There are also situations where you’ll find dented or imperfect case […]

Spotlight on D-M Targets: AR500 Steel Targets and Hangers

Anyone with acreage and long-range rifles needs a bunch of steel targets! And that’s what I’ve been working on lately, getting the UR Ranch setup for some serious shooting and training. Recently, I’ve become friends with Seth Gardner of D-M Targets from Washington State. He shoots in the same circles, and is super-involved in the […]




Reloading Safety

Polls