Category: Manson Reamers

Building a 2-Mile Rifle: .375 CheyTac Build

My Incredible Hulk .50 BMG rifle set me on the ELR path. I knew right away this was only an entry point and that I’d want a more serious ELR rifle – enter .375 CheyTac. This build is designed for ELR competition, something I’m looking forward to learning under the mentorship of King of 1 […]

22 ARC Rifle Build: Chambering, Threading, Break-In

Last fall Hornady announced the 22 ARC (Advanced Rifle Cartridge), a round optimized for performance from an AR-15, but also powerful in a bolt action. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]

7 PRCW Build Part 2: EC Tuner V2 Machining/Install

I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2!  *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]

7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering

Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]

All About Chambering Reamers with Fred Zeglin

Master gunsmith and author Fred Zeglin  joins us to share everything you ever wanted to know about reamers.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other […]