Tag: EC Tuner

Precision Rifle: Get On, and Stay On Target! Fundamentals From a World Champ!

Ever wonder how to get started in long range precision shooting? Today, we’re getting tips from F-Open champion Erik Cortina! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]

Part 3: 7 PRCW Bedding and Break In

Ever since I met Erik Cortina, I’ve been curious about F-Class. It’s finally time to shoot my very own 7 PRCW! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]

22 ARC Rifle Build: Chambering, Threading, Break-In

Last fall Hornady announced the 22 ARC (Advanced Rifle Cartridge), a round optimized for performance from an AR-15, but also powerful in a bolt action. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]

7 PRCW Build Part 2: EC Tuner V2 Machining/Install

I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2!  *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]

7PRCW Build Part 1: Woox Titano Chassis and Barrel Chambering

Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]

2023 Rock Chuck Olympics Episode 7: Rifle ELR

After taking the Canik Rival-S long distance, it was time for our RCO competitors to take on Harold the evil rock chuck during our rifle ELR stage.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

TESTED: Sierra 6mm 107gr MatchKing Bullets

Sierra Bullets is widely known for their competition MatchKing bullets and their legendary performance. In this video, we put the 6mm 107 grain HPBT MatchKing to the test.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including […]

TESTED: Winchester StaBALL Match (Varget Speed Powder)

Hodgdon released two new powders, StaBALL Match and StaBALL HD at SHOT Show 2023. Today, we’re taking a closer look at StaBALL Match!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, […]

6GT Precision: From Reloading to 1000 yard Shooting

It’s time for some insane precision with 6GT! In this story we get hands on with the load, the gear, and the process from start to finish. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

Cortina Precision: Erik Cortina’s Story

In this story I have the privilege of talking with legendary shooter and owner of Cortina Precision, Erik Cortina.   Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]

6GT Build Part 3: Barrel Break-In

I’ve always wanted a 6GT. Now that it’s complete, it’s time to send rounds down range! In this story, I’ll cover optics, break-in, and some first loads! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

Rimfire Results: Anchutz 1710 Compeition with EC Barrel Tuner

Struggling to find centerfire primers? We’ve got another way to shoot small groups – .22 LR tuners! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) […]

6.5x47mm BR Build Part 4: Sightron SV Scope + Break-In

All of the work you put into a rifle build will be put to the test once you start shooting your new rifle! In this case, I had invested more time into building the rifle compared to any other. So I was excited (and a bit nervous) to get a scope mounted and to start […]

For Commerical Inquiries:
Ulitmate Reloader Commercial Services



Reloading Safety

Polls