It’s finally begun! My next rifle build is a super precision 6GT with an MDT ACC chassis and Bat TR action. Let’s kick off the series! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]
Tag: Straight Shot Gunsmithing
Threading a THIN Sporter Barrel for a Suppressor (30-06 Example)
That barrel is too thin to thread! I’ve heard that said multiple times, and I’ve even said it myself. So what do you do when you want to put a suppressor on your sporter rifle, and don’t have enough “meat” on your barrel? I’ll cover that in this story! Be sure to check out my […]
Re-creating Berger’s AMAZING 77 OTM 223 Load
The 223 trainer build we completed here on Ultimate Reloader is a one hole shooter with the factory loads from Berger: The Berger Match Grade 77gr OTM Tactical loads that is! In this story we’ll try and duplicate this load from some reverse-engineering and with some shooting. This will be fun! Disclaimer Ultimate Reloader LLC […]
223 Trainer Build: My Most Accurate Rifle EVER?
Few things are as rewarding as shooting the rifle you just built on your lathe. This satisfaction is compounded when your rifle’s performance exceeds your expectations! And that is what this story is about: my long-awaited 223 trainer build. For background, this rifle is based on the 6 Dasher PRS rifle I built here on […]
True Bore Alignment System In-Depth
If you’re working as a gunsmith on rifle barrels, actions, or related parts, chances are that you spend a lot of time with critical alignment. Every time you go to machine these parts you’ll need precise alignment with your lathe spindle. And these alignment tasks can eat up a LOT of time. Nathan Dagley over […]
