Lapua brass has been synonymous with winning for years. I’ve had great success with it as have many world-renowned shooters. When Gavin presented me the opportunity to try one of Lapua’s newest brass offerings, 6mm GT, I couldn’t resist trying it for myself. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this […]
Sierra’s MatchKing line has long been a favorite of competitive shooters seeking precision and performance. We’ve had great success with Sierra’s MatchKing line here at Ultimate Reloader and are testing Sierra’s flagship .22 Caliber 77 Grain HPBT in three different .22 caliber rifle builds! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading […]
We’ve done a lot with Area 419’s ZERO press and even shown how it’s made. Area 419 has just released an updated Gen 2 ZERO press – let’s check it out! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on […]
Consistency is at the center of precision reloading. This doesn’t just mean using the same components but also how you size the brass and seat the bullet. So how do you make sure it’s perfect each time? Watch the videos or read on to see how you can get consistent shoulder bump and seating depth […]
Reloading a massive cartridge like .375 CheyTac takes special supplies. Today I start my reloading journey for my .375 CheyTac build with the Forster Co-Ax XL! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]
Ever dream of chambering your own rifle barrels? Not just barrels, but benchrest-quality barrels capable of incredible precision? In this video, brought to you by the Colorado School of Trades and OTM Tactical, I walk through the equipment, machinery, training, and investment you’ll need to do just that! (Use code UR5 to save 5% on […]
I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2! *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
The array of bolt faces and dimensions available can get overwhelming and confusing. Today, we’re clearing it up! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other […]
