Tag: FW Arms

Page 1 of 2
1 2

Improve Your Die Setup: Lock Rings & Loading Full Progressive .308 on the X-10

We’ve been shooting a lot of .308 lately —in fact —we are out! We need to crank out a ton more, so this was a great time to set up a progressive press. I’ve been working with the Frankford Arsenal X-10 lately. Along the way, I’ve come across some notable gear like the Frankford Arsenal […]

Automated Bulk .223 Loading on the Mark 7 Apex 10

Bulk processing over 40,000 .223 cases from Mojo Precision on the Mark 7 Apex 10 was just the start of the process. We decapped using FW Arms dies and Berdan Sentry, resized with the Lyman carbide pro die, and trimmed with the Mark 7 Power Trim Xpress. We decided to run a dedicated priming session […]

Mark 7 Apex 10 Primer Xpress

Mark 7 has made some strides with their Apex 10 Gen 2 upgrades including a new priming system and billet toolhead. We’re taking it one step further by adding the Mark 7 Primer Xpress!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). […]

Mark 7 Apex 10 Gen 2 Upgrades

I’ve run the Mark 7 Apex 10 manually and with autodrive. Kyle Shields most recently used it, with some new upgrades, to process over 40,000 pieces of .223 brass! (Also check out Mark 7’s Halloween promotion!) Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]

Loading Precision .223 with Lyman Pro Dies

When Lyman acquired Mark 7, a company focused on commercial and semi-commercial progressive reloading, it gave them an opportunity to collaborate on a die set specifically optimized for progressive presses and the demands of commercial reloading. Their brainchild? Lyman Pro Die Sets.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article […]

Reloading Problems: FW Arms Commercial Grade Solutions

FW Arms makes some of the best industrial-grade reloading equipment in the industry. We put their products to the test, processing over 40,000 mixed .223 cases, and all passed with flying colors! Watch or read on to learn more about their entire product portfolio.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading […]

.223 Bulk Processing: 40,000 Cases!

We’ve finally finished processing a 55-gallon drum of .223 brass from Mojo Precision with help from FW Arms and Mark 7. Watch and read on to see what it took!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

FW Arms Challenge: How Many Decappers Broken Processing 40,000+ 223 Cases?

FW Arms is going to give away 10 of their premium decapper dies to Ultimate Reloader viewers! We just finished processing over 41,000 .223 Mojo Precision Cases through an auto-driven Mark 7 Apex 10 with FW Arms gear. This is the biggest reloading feat we’ve ever undertaken – an entire 55 gallon drum! There were […]

Berry’s 62gr Bulk 5.56 Reloading End to End: Dillon XL-750 Setup & Optimization

Bulk-loading a 55-gallon drum of Mojo Precision .223 brass takes industrial equipment. With a fully setup Dillon XL-750 and Armanov bullet feeder, loading rounds just becomes a matter of pulling a handle!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content […]

Page 1 of 2
1 2