Bulk processing over 40,000 .223 cases from Mojo Precision on the Mark 7 Apex 10 was just the start of the process. We decapped using FW Arms dies and Berdan Sentry, resized with the Lyman carbide pro die, and trimmed with the Mark 7 Power Trim Xpress. We decided to run a dedicated priming session […]
Mark 7 has made some strides with their Apex 10 Gen 2 upgrades including a new priming system and billet toolhead. We’re taking it one step further by adding the Mark 7 Primer Xpress! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). […]
I’ve run the Mark 7 Apex 10 manually and with autodrive. Kyle Shields most recently used it, with some new upgrades, to process over 40,000 pieces of .223 brass! (Also check out Mark 7’s Halloween promotion!) Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]
We’ve spent lots of time highlighting the Apex 10 Autodrive and the numerous sensors available for it. This time, we’re bringing the Autodrive technology to another favorite—the Dillon RL1100! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]
Previously we showed how to set up the DA3000 with the CP2000 and convert 223/5.56 brass to 300 blackout. To load the new brass, we have the Dillon RL1100 set up to load 220 grain subsonic 300 blackout ammunition and some machine guns to test it with. This is going to be FUN! Disclaimer Ultimate […]
Many forget about common maintenance. With our Mark 7 Apex 10 torn apart for a caliber conversion, we decided to do some routine maintenance. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
Today we’re unboxing the new Dillon DA 3000 Autodrive. We’ll combine it with the CP2000 case processing press and give you all the details as we prepare for bulk conversion of 223 brass to 300 blackout brass. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you […]
Continuing our series of videos on the Mark 7 Apex 10, we have John Vlieger, a master tech from Mark 7 showing us caliber conversion techniques. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]
Continuing our series of videos on the Mark 7 Apex 10, we have John Vlieger from Mark 7 on set to help us set up and dial in the powder measure. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on […]
