Category: KMS Squared

Page 1 of 3
1 2 3

Hands on with the Dillon RL550C: .308 Tracers, and .308 Subsonic Loads

After bulk-processing .308 brass with the CP 2000 and DA 3000, we’re bulk loading tracers and subsonic rounds on the Dillon RL-550C. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical […]

10 Armanov Upgrades that will take your XL750 to the next level!

Armanov makes a number of Dillon press upgrades, like the RL1100 lock-n-load toolhead. This time, we’re tricking out our Dillon XL-750! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]

TESTED with 45 ACP: Berry’s 185 grain HBRN Bullets

We recently showed Kyle Shields loading .45 ACP on the Dillon XL-750 with the Double Alpha Academy Click-Adjustable Powder Knob. Today, we’re taking a closer look at the bullet we used—Berry’s .45 ACP 185 grain hollow base round nose bullets!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]

.45 ACP Loading Session on Dillon XL-750 (New User)

While Kyle Shields has spent lots of time with single-stage presses, it was time to get him up to speed on progressives. I tasked him with loading .45 ACP on the Dillon XL-750.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The […]

Curved Linkage for Forster Co-Ax Press: Making a Good Press Better!

How can we make the excellent Forster Co-Ax loading press even better?  It’s no secret that I, along with many other accuracy-minded handloaders, greatly appreciate this press. We’ve used it to produce extremely accurate 223 ammunition and also improved it with Forster quick change jaws and KMS Squared lights. In the short video, we examine […]

Dillon RL-550C Upgrade with Inline Fabrication

To best accommodate high volume rifle reloading, I have two Dillon RL-550C presses set up—one for 6GT and one for 223. Today I’m upgrading both of them.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

LEE Six Pack Pro: KMS² UFO Press Light and Inline Fabrication Mount

KMS² just released their UFO SP press light for the LEE Six Pack Pro. Midsouth Shooters Supply sent along a LEE Six Pack Pro for me to work with and Inline Fabrication sent a No. 95 quick change top plate for their Ultramount system.      Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

TESTED: Barnes 130 grain 30 Caliber TTSX Bullets

A 130 grain hunting bullet in .30 caliber? Yes, these bullets are screamers and accurate as well! Another well-regarded hunting bullet from our friends at Barnes Bullets.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

Success: Hornady 178gr ELD-X on Elk at 405 yards (30-06)

We’ve tested Hornady’s ELD-X hunting bullet in a number of different calibers and have been consistently impressed with its accuracy and performance in Clear Ballistics Gel blocks. It was time to take that bullet elk hunting!  *Note: This is a successful hunting story and video. The harvest is shown here and in the video.  Disclaimer […]

Page 1 of 3
1 2 3