Tag: Reloading Press

Page 3 of 55
1 2 3 4 5 … 55

Forster Original Case Trimmer: Trimming and Neck Turning

Case trimming is a super-important part of the reloading process for bottleneck rifle cartridges. And for those concerned with maximum accuracy, neck turning is also an important capability and consideration. So what if you could buy one tool that would both trim cases AND turn case necks… Enter the Forster Original Case Trimmer, the subject […]

300 PRC Budget Build part 1: Action Blueprinting

I’m excited to kick off my 300 PRC “Budget Build” in this article. I’ve been working on putting together all of the related pieces and parts, have taken training with Gordy Gritters, and have previously completed a 300 PRC full-custom build, and now it’s time for the 2nd 300 PRC build! In this story I’ll […]

Loading 6.5 PRC with MEC Metallic Gear End-To-End

It’s time to start loading some 6.5 PRC, and I thought this would be a great opportunity to showcase the MEC Metallic lineup of reloading gear! In this post, I’ll show some MEC gear I haven’t shown yet, and walk through the end-to-end process of reloading 6.5 PRC in the video below. Let’s get to […]

Brass Deals from Capital Cartridge: Coupon Code and Cash for Brass

If you’re looking for good deals on brass, consider previously fired brass! Capital Cartridge offers a wide variety of different options for previously fired brass, including specialty calibers. Here’s an update on how you can save money at Capital Cartridge, and also get reimbursed for your used brass! Save 10% on Your Capital Cartridge Order […]

Dillon RL-550C: Unboxing, Overview, Setup, Loading Rifle and Pistol Ammunition

The Dillon RL-550C is arguably the most “tried and true” progressive reloading press on the market today. This press offers a blend of affordability, quality, and precision that’s truly unique. In this article, I’ll cover the RL-550C in-depth, starting with an unboxing, and finishing with loading rifle/pistol plus some insights into issues that you as […]

6mm Creedmoor PRS Load Development

I have many different approaches to load development. In fact, I tend to change my process just about every time I develop a load. The specific method and process I’ll use is based based on the tools, components I have on hand, and my needs/requirements for the ammunition I’m developing. In this article, I’ll outline […]

Timney HOWA 1500 Trigger Upgrade: Install, TriggerScan, Shooting

I consider the trigger to be one of the most important parts of a precision rifle. For me, the dynamics of the trigger have a huge effect on how consistently I can shoot a rifle, espeically when that rifle isn’t “locked down” in a bench rest. Recently I performed a rebuild on a HOWA 1500 […]

SHOT Show 2020: Interview With Steve Dillon

I’ve long wondered about the origins of Dillon Precision and Dillon Aero. While at the 2020 SHOT Show, I ran into Steve Dillon, son of Mike Dillon who started both companies. The following is the fascinating discussion I had with Steve Dillon about Mike Dillon’s legacy, the origins of Dillon Aero, how Dillon Precision came […]

Page 3 of 55
1 2 3 4 5 … 55
Become a Patron!



Reloading Safety

Polls

Contact Ultimate Reloader

Contact ultimate reloader by clicking here.