SAAMI-Certified 25 Creedmoor is new for 2025. I built a 25 Creedmoor back in 2020, but it was still a wildcat at the time with no factory rifles or ammunition available. It’s time for an update! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]
Here at Ultimate Reloader we’re all about data. We’ve shown a few pressure tests featuring Alpha Munitions Brass but are approaching this one with a new methodology. Follow along as we push Alpha Munitions 7mm SWC brass to the limit, but don’t try this at home! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]
I’ve always known that load development matters, but I recently had a fundamental change in my load development philosophy. I’m going to show this with concrete results as I load precision 6.5 Creedmoor ammunition on the Area 419 ZERO press with Triebel dies from Creedmoor Sports. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]
I recently took apart Jim Harmer’s troublesome Mossberg Patriot just to take a look. I agreed it was the worst-performing bolt-action rifle I’d ever fired. Since then, I got to work and completely transformed it! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these […]
I’ve built a lot of rifles over the years but this is one I think will make my favorite’s list: 6mm x 47 Lapua in a WOOX Furiosa Ultra chassis around BAT Machine’s brand-new Hammerhead action! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]
