Tag: BAT TR Action

6GT Build Part 3: Barrel Break-In

I’ve always wanted a 6GT. Now that it’s complete, it’s time to send rounds down range! In this story, I’ll cover optics, break-in, and some first loads! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]

Hands-On: Short Action Customs Barrel Vises

Changing barrels can be easy, or a bit tricky. Having the right tools helps, and that’s where the Short Action Customs barrel vises come in handy! Today we take a closer look at two vises from Short Action Customs, the modular vise and Bravo vise.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by […]

Bat Machine IN-DEPTH Chambering Discussion/Demo with Bruce Thom

It is truly a privilege to have the opportunity to work with some of the best experts in the gunsmithing and manufacturing industry. During my recent visit to Bat Machine, I had the opportunity to watch owner Bruce Thom perform a complete barrel job including threading the muzzle and chambering the barrel for 22 Creedmoor. […]

Modular Action Wrench from Short Action Customs

I very frequently use a variety of Short Action Customs (SAC) equipment in my gunsmithing shop and on the channel. I often use one action for multiple barrels, so a barrel vise and action wrench are everyday must-haves for me.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]

6GT Barrel Chambering, Polishing, Laser Engraving (In-Depth)

I’m building my first 6GT- and in this story we’ll cover the barrel work: muzzle threading, breech-end machining, chambering, and then barrel polishing and laser engraving! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this website (including videos, articles, […]

INSANE 6.5 Creedmoor PRS Rifle Build (Bat + Foundation + Hawkins Precision)

There are few things in life that bring me more satisfaction than building ultra-precision custom rifles! In this story, I’ll share my latest build: a tack-driver PRS build with Bat TR Action, Foundation Genesis 2 stock, and Hawkins Precision M5 DBM bottom metal! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this […]

TESTED: Hornady 110gr A-Tip 6mm Bullets

One of my favorite things to do is testing components like bullets. In this story, we’ll take a hands-on look at Hornady’s new 110 grain A-Tip 6mm bullets. Both at the range, and in the “laboratory”. If you’re curious about these bullets, you’re in the right place! Please Welcome Travis Fox I recently enlisted the […]

ULTIMATE 6 Dasher PRS Rifle Build Start To Finish

After competing in a few PRS matches, I decided it was time to take my “rifle game” to the next level. I wanted something that would perform great at up to 1000 yards, have minimal recoil, and sport top quality components and parts. This article tells the story of building just such a rifle: my […]

BAT TR Action: Detailed Overview and Build Kick-Off

There are some times when it pays to spend more for top quality. If you’re building a precision rifle, the action is one of the most critical investments you’ll make. I’ve long been wanting to try out an action from BAT machine, and now is that time! In this article I’ll give an overview of […]

For Commerical Inquiries:
Ulitmate Reloader Commercial Services



Reloading Safety

Polls