Category: 2.23/5.56

Page 2 of 6
1 2 3 4 6

Never Trim Again! RCBS X-Die

The RCBS X-Die essentially eliminates the need to trim your brass after an initial trimming. How does it work? Watch and read on to find out! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]

Automated Bulk .223 Loading on the Mark 7 Apex 10

Bulk processing over 40,000 .223 cases from Mojo Precision on the Mark 7 Apex 10 was just the start of the process. We decapped using FW Arms dies and Berdan Sentry, resized with the Lyman carbide pro die, and trimmed with the Mark 7 Power Trim Xpress. We decided to run a dedicated priming session […]

Loading Precision .223 with Lyman Pro Dies

When Lyman acquired Mark 7, a company focused on commercial and semi-commercial progressive reloading, it gave them an opportunity to collaborate on a die set specifically optimized for progressive presses and the demands of commercial reloading. Their brainchild? Lyman Pro Die Sets.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article […]

.223 Bulk Processing: 40,000 Cases!

We’ve finally finished processing a 55-gallon drum of .223 brass from Mojo Precision with help from FW Arms and Mark 7. Watch and read on to see what it took!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

Is .223 Enough for Deer?

While the .30-06 has long been my go-to hunting rifle, did you know I’ve dispatched over a dozen deer with a .223? (Note: .223 is illegal for deer in Washington state but legal in many others.)  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]

What’s in My Range Bag?

Though we have amazing resources here at the Ultimate Reloader Ranch, heading to most of our ranges is still an undertaking. Forgetting something means a lot of lost time and frustration. So what do we bring with us and how do we keep it all straight?  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

TESTED: Athlon Cronus BTR Gen 2 UHD 1-6×24

LPVO’s are extremely versatile, handy scopes. Guy Miner recently tested the premium Athlon Cronus BTR Gen2 on a lever action—now it’s my turn to see how it performs on a Stag Arms SPCTRM.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The […]

Case Cleaning with Dillon’s Vibratory Cleaner & Media Separator (CV-2001 and CM-2000) in BULK!

Our most recent insane project is bulk-processing 55-gallon drums of once-fired 9mm and .223 brass from Mojo Precision! With approximately 45,000 .223 cases and 80,000 9mm cases to clean, we got to work with the Dillon CV-2001 and CM-2000!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]

TESTED: Short Action Customs Nexus Press

Short Action Customs is the newest precision manufacturer to release their own reloading press. Today we’ll take an in-depth look at the new Nexus press! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition […]

Page 2 of 6
1 2 3 4 6