Our most recent insane project is bulk-processing 55-gallon drums of once-fired 9mm and .223 brass from Mojo Precision! With approximately 45,000 .223 cases and 80,000 9mm cases to clean, we got to work with the Dillon CV-2001 and CM-2000! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]
At this point we have cleaned and lubed the brass, resized it, primed it and dropped in the powder charge. It’s time to seat the bullet! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]
To this point we’ve cleaned, resized, trimmed, and primed our rifle brass. Now it’s time to charge it with smokeless powder! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
In the first video in this series, we cleaned once-fired Federal cases using Lyman’s vibratory tumbler and walnut shell media. We then resized the cases, decapped/deprimed them, trimmed them and did any other necessary case-prep work. Next up is priming! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]
Here at Ultimate Reloader, we use a lot of sophisticated equipment, but every person needs to start with the basics. In this series, we’ll review the basics of reloading for all the beginners out there, starting with cleaning brass! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]
