We set out to develop an “Ultimate 6.5 PRC Hunting Load” and our results are covered in this story! The formula? A heavy-in-class hunting bullet, great accuracy, and some serious stopping power, all with great long-range performance. Read on to find out what we came up with! Disclaimer Ultimate Reloader LLC / Making with Metal […]
Frankford Arsenal Reloading Series
Are you interested in learning to reload your ammunition but don’t know where to start? Are you interested in affordable precision reloading? If so, please check out the free content series I put together in partnership with Frankford Arsenal, the subject of this story! Check Out the Series on Frankford Arsenal Channels If you’re interested […]
6.5x47mm BR Build Part 1: Chambering the Barrel
Here it is! My first all-out benchrest build! I’m excited to build this rifle which will serve as a test bed for the evaluation of different cartridges and components. In this multi-part series, I’ll walk through the end-to-end process of building this rifle including the barrel work (this post), stock inletting, stock bedding, and some […]
NEW UR T-Shirts are In Stock!
Ultimate Reloader shirts are BACK IN STOCK, and we have a new design that’s also available for purchase NOW. You may want to buy both… What’s more, we now ship internationally (see full list below)! You can get these shirts right HERE! I Reload Therefore I Am T-Shirt Ultimate Reloader Class Gray T-Shirt Countries we […]
NEW PRC Cases from Lapua
Lapua makes some of the best brass out there, so when there’s a new cartridge available from Lapua, it’s exciting news! And this year Lapua rolls out new cases for PRC cartridges, which is awesomeness. New for 2021: 6.5 PRC Lapua Cases From the Lapua Product Page: Lapua, world-renowned for producing the finest cartridge cases […]
TESTED: NEW EC Tuner Brake
Many of you in the Precision Rifle community have seen the new Patent Pending EC Tuner Brake from Erik Cortina, and have probably been thinking: “Does it work?”. In this story, we’ll find out by testing the EC Tuner Brake with three different rifles, with factory ammunition, and with handloaded ammunition. About the EC Tuner […]
Weighing Down the XLR Element 4.0 Magnesium Chassis
In my last story covering the new XLR Element 4.0 Magnesium chassis, we saw just how light-weight this chassis can run with both centerfire and rimfire rifles. This time, we’ll weigh things down, swap buttstocks, and put a Bergara 6.5 PRC rifle in this chassis. Element 4.0 Magnesium From the XLR Product Page: The Element […]
TESTED: Hornady 110gr A-Tip 6mm Bullets
One of my favorite things to do is testing components like bullets. In this story, we’ll take a hands-on look at Hornady’s new 110 grain A-Tip 6mm bullets. Both at the range, and in the “laboratory”. If you’re curious about these bullets, you’re in the right place! Please Welcome Travis Fox I recently enlisted the […]
NEW: XLR Element 4.0 Magnesium Chassis In-Depth
XLR, a leader in the rifle chassis space has just launched the latest version of their ultra-light hunting-oriented chassis: the Element 4.0 Magnesium. In this story, I’ll get hands-on with this new chassis and try it out both with rimfire and centerfire rifles. Let’s go! Element 4.0 Magnesium From the XLR Product Page: The Element […]
MY KS-47 BROKE: Here’s How I Fixed It
Part of owning and shooting firearms is the process of troubleshooting and fixing issues that arise “along the way”. I recently had an issue with my Palmetto State Armory KS-47 Hybrid AR chambered in 7.62x39mm– but nothing that couldn’t be easily fixed! This is the story of how I got this rifle “back in action”. […]
6.5x47mm Build: Uintah Precision UPR-10 Hybrid AR
I’ve been curious about 6.5x47mm Lapua (the cartridge) for quite a while! This handloaders-oriented cartridge is similar to other cartridges like 6.5 Creedmoor, but offers some advantages that I’ll explore in this article, and future articles. I’ve also wanted to try Triebel Reamers (from Germany), and to build a barrel for Uintah Precision’s UPR-10 platform. […]
TESTED: 4D Reamer Rentals (Counterbore Lathe Job)
Have you ever had a one-off job that involved a special tool? How about when that tool can take months to get? That’s where tool rental RULES. And for gunsmithing tools (namely reamers) there’s a solution for that: it’s 4D Reamer Rentals at 4drentals.com! In this story, I used 4D Reamer Rentals for a one-off […]
True Bore Alignment System In-Depth
If you’re working as a gunsmith on rifle barrels, actions, or related parts, chances are that you spend a lot of time with critical alignment. Every time you go to machine these parts you’ll need precise alignment with your lathe spindle. And these alignment tasks can eat up a LOT of time. Nathan Dagley over […]
Reloading 223 / 5.56 From A to Z
223 Remington and 5.56 NATO rifles span a wide variety of uses and scenarios. Reloading for 223 / 5.56 is very much worthwhile, but there are some special considerations to think about before you head to your reloading bench. We’ll cover the entire process from planning to loading in this story! 223 -vs- 5.56 Ammunition […]
TECH TIP: Case Gauge -vs- Min Dimension Gauge
Wondering what the difference is between a standard “Case Gage” and a “Min-Chamber Gage”? That’s exactly what we’ll cover in this story! Wilson Case Gage A standard case gage from Wilson Tools and Gages (LE Wilson) is used for two things. First, you can view the back of the case gauge to check headspace (sizer […]
NEW CMMG ZEROED Linear Compensator: Hands-On and In-Depth
CMMG just announced ZEROED- a lineup of muzzle accessories that currently includes linear compensators, and a 22 cal flash hider. In this story we’ll take a hands-on look at the ZEROED 9mm linear compensator! About ZEROED Here’s the summary from the CMMG ZEROED landing page: CMMG is kicking off the ZEROED Sub-Brand of accessories with […]
TESTED: RCBS Uniflow III Bench Powder Measure
The RCBS Uniflow III is the latest bench powder measure from RCBS, and in this article, we’ll take a hands-on look at this new powder measure, and put it to the test! About the RCBS Uniflow III Here’s the information from the RCBS Uniflow III product page: The Uniflow-III Powder Measure is the most accurate […]
HANDS-ON: NEW SK High Velocity Match 22LR
If you’re looking for speed and precision for your rimfire rifle, SK’s new High Velocity Match ammunition is a new product worth looking at, and that’s exactly what we’ll do in this story! About SK High Velocity Match Ammunition From the SK Ammunition product page: The new SK High Velocity Match exits the muzzle at […]
TESTED: Hornady 153 grain 6.5mm A-Tip Bullets
One of my favorite things to do is to test bullets. I’m not sure why it’s so satisfying, but it is! In this story, we’ll take an in-depth and hands-on look at Hornady’s 6.5mm 153 grain A-Tip bullets. About 156 grain 6.5mm A-Tip Bullets Hornady’s 153 grain 6.5mm A-Tip bullets are an ideal choice for […]
TESTED: Forster Bench Rest Powder Measure
When you’re loading precision ammunition, measuring powder charges is both critical to good accuracy, and time consuming. So it’s important to select the right powder measure with the right features. Forster has re-introduced their Bench Rest Powder Measure, and in this story, we’ll take a hands-on look! About the Forster Bench Rest Powder Measure The […]
Mark 7 Reloading 2021 Update
Wondering what’s new for Mark 7 reloading equipment? Wondering how COVID and the political situation is affecting Mark 7? Chris Lindblom from Mark 7 reloading stopped by the Ultimate Reloader Ranch to discuss, and that’s what we’ll cover in this story! Responding to COVID Mark 7 reloading has been working literally around the clock to […]
Hornady New Scales: G3-1500 Pocket Scale, M2 Digital Bench Scale
I just got my hands on the brand new scales released from Hornady in 2021! In this story, we take an initial overview on the G3-1500 Pocket Scale and the M2 Bench Digital Scale hands-on and test how accurate they are. G3-1500 Scale Here’s the information on these new scales from the Hornady Website: Item […]
6.5 PRC Precision Loads using Triebel Dies (Germany)
If you are in to precision rifle shooting, you most likely have a respect for high quality equipment and gear. Recently, when discussing the Turban CNC Präzipress with the inventor Thomas Turban, I was made aware of a lineup of ultra-precision dies that like the Präzipress are made in Germany. The dies I’m talking about […]
Responding to “2020”, looking forward: Lyman and Mark 7
The last year has been TRULY crazy- the election “predictable”, but that was just the beginning. In this video, I discuss the events of this last year, and what both Lyman and Mark 7 have done to cope with unprecedented demand and a surge of new customers. I want to thank Chris Lindblom from Lyman […]
UR 2.0: 200K Subscribers, New Studio, Here’s What’s Next!
Here at Ultimate Reloader, a LOT has been going on! From surpassing 200,000 subscribers, to building a new studio area, and lots of other things as well! Here’s my quick update on all that and what’s next! Hitting 200,000 Subscribers on YouTube I had no idea when I started the Ultimate Reloader YouTube channel that […]
