It’s time for some insane precision with 6GT! In this story we get hands on with the load, the gear, and the process from start to finish. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]
Tag: Chambering a rifle Barrel
6GT Build Part 3: Barrel Break-In
I’ve always wanted a 6GT. Now that it’s complete, it’s time to send rounds down range! In this story, I’ll cover optics, break-in, and some first loads! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, […]
6GT Barrel Chambering, Polishing, Laser Engraving (In-Depth)
I’m building my first 6GT- and in this story we’ll cover the barrel work: muzzle threading, breech-end machining, chambering, and then barrel polishing and laser engraving! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this website (including videos, articles, […]
Winchester 70 Rebarrel Part 2: Start to Finish Process
Also published on our sister website http://makingwithmetal.com Building a precision rifle is an exacting process. You need to have knowledge, skills, tools, and a LOT of patience. In my last post, I talked about the planning, preparation, and experiences involved in completing this rifle build. In this post, I’ll walk through the steps I performed […]
