Tag: Custom Rifles

Page 1 of 2
1 2

NEW: Custom 25 Creedmoor Build A-Z

SAAMI-Certified 25 Creedmoor is new for 2025. I built a 25 Creedmoor back in 2020, but it was still a wildcat at the time with no factory rifles or ammunition available. It’s time for an update!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]

The 2-Mile Camera: LONGSHOT with Clay Rhoden

ELR shooters are handicapped by the ability to see their impacts. Such extreme distances require more than just the naked eye and a scope to confirm an impact. Clay Rhoden, King of One Mile and founder of Longshot Target Cameras, set out to solve this problem, redefining what a shooting experience can be in the […]

Science of Accuracy – The Global Precision Group Process

Shooting extremely long distances is not easy. There is a lot you have to do right and it takes a crew to set up targets, film, and make the shot. World Champion Paul Phillips, founder of the Global Precision Group, explains that though this process is more like a production, it is incredibly rewarding to […]

Optimize Your Powder Choice for the Creedmoor Family

There’s a Creedmoor cartridge for just about every shooting occasion. Given the SAAMI approval of Hornady’s .25 Creedmoor earlier this year, I thought it was time to document reloading considerations for all of the Creedmoor cartridges!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept […]

The 2-Mile Shot: Getting on Target with Paul Phillips (GPG)

Shooting two miles successfully is no easy task. It takes lots of data, investigation, and special equipment. When I built my .375 CheyTac for this exact task I did so with input from King of Two Miles and head of Global Precision Group Paul Phillips. Now I’m out on the range with Paul and King […]

7mm SWC Custom Build: End to End

7mm SWC can be the difference between being on target and off target in windy conditions. It also makes an incredibly compelling hunting cartridge. Watch the full video and read on to find out why!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these […]

TESTED: Leupold VX-6HD Gen 2 3-18×44

If you desire a lightweight hunting rifle but don’t want to give up tactical features, Leupold’s VX-6HD Gen 2 line is a great option. Previously we’ve shown Leupold’s VX-5HD – let’s see what’s new!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). […]

Sherman Wildcats: Custom Rifles, Reloading, & Performance!

Influenced by Piet Malan of Impact Shooting, Sherman Wildcat Cartridges are coming to Ultimate Reloader!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for […]

NEW: Sierra 145 Gr. 6.5mm Tipped GameKing

I started using Sierra Bullets in the 1970s and I’ve always found them accurate and reliable. I’ve used them for competition, on SWAT, and hunting both varmints and big game. I shot out several .308 Winchester barrels at around 6,000 rounds each with .30 caliber 155 and 168 grain Sierra MatchKing bullets. For varmint and […]

New Load Development Key: 6.5 Creedmoor with Triebel Dies

I’ve always known that load development matters, but I recently had a fundamental change in my load development philosophy. I’m going to show this with concrete results as I load precision 6.5 Creedmoor ammunition on the Area 419 ZERO press with Triebel dies from Creedmoor Sports.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

Samson: Foundation’s Fully Featured Competition Stock

Featuring more weight and buttstock adjustments, Samson is the latest addition to Foundation Stocks’ competition line. This stock has a completely different vibe than other Foundation micarta stocks – watch and read on to see the rifle I built to match!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or […]

Ultradyne UD7 7mm PRC Long Action

Ultradyne offers a number of combinations of their UD chassis. We’ve looked at the UD3, UD5, and UD7 chassis, all named for the number of M-LOK slots on the side of the forend. This time we’re looking at the UD7 again, but the long action version.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]

Precision Rifle: Get On, and Stay On Target! Fundamentals From a World Champ!

Ever wonder how to get started in long range precision shooting? Today, we’re getting tips from F-Open champion Erik Cortina! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]

50 BMG Precision Loads with Triebel

Today we’re loading some match .50 BMG for the Incredible Hulk using Triebel dies!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration […]

NEW Precision Matthews PM-1440HVT-2 Lathe In-Depth Hands-On Overview

Back in November, I set up the Precision Matthews PM -1440-HVT-2 at Precision Rifle Concepts, promising an in-depth overview once I spent some time with it. That time has come!  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this […]

Athlon Cronus ATS Thermal Scope 50-640

Thermal scopes and predator hunting are things I’ve taken a recent interest in. In pursuit of those, I’m testing the new Athlon Cronus ATS Thermal Scope.  Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]

Page 1 of 2
1 2