The mission for the first range trip with the AR-MPR rifle was to really do two things: First, it was about function checking the rifle. Second, it was about sighting in the Nikon Monarch 6-24x50mm riflescope. A third and less important goal was to see how accurate I could shoot this rifle based on […]
AR-MPR – Getting Ready for first range trip
Well, I’m pretty excited to be heading to the range to do the function check on the AR-MPR rifle, and get things sighted in. I’ve got a bunch of 20 round mags on loan, and all of the other accessories that I think I’ll need- but I’ll need ammo for sure. Why not break in […]
AR-MPR: Mounting Nikon Monarch Scope and M-223 Mount
In this post, we’ll look at what’s involved in mounting the Nikon Monarch 6-24 x 50mm riflescope to our AR-15 using the Nikon M-223 scope mount. Before we get on with the video, let’s take a look at the finished product: What’s nice here about using the Midwest Industries quad rail handguard, is the “continuous […]
AR-MPR – Nikon Optics Overview
One of the popular sayings amongst video professionals is “Sound is 50% of video”. The point is- many folks focus almost entirely on the picture quality in their videos, and neglect to pay enough attention to getting proper sound in their videos. Why do I mention this here? Well, 50% of a good precision rifle […]
AR-MPR: Build Part 7 – Lower – Buttstock and Mating Upper Lower
In this, the final AR-15 assembly video, we’ll walk through the installation of the takedown pin and the buttstock assembly. Finally, we’ll put the upper and lower together for the first time and establish basic functionality (formal function check to follow in subsequent posts). After all of the planning and work that went into getting […]
New Tools Section on Ultimate Reloader
One of the things I’ve been meaning to do for a while now is to provide a reloading costs calculator so that readers can answer the age old question – “How much will I save if I reload?”. You can find this resource under “Tools” in the info center (left pane on home page) or […]
AR-MPR: Build Part 6 – Lower – Trigger Grip and Safety
Continuing our way through the lower build steps, in this video, we’ll look at installing the Geissele national match trigger assembly, the trigger guard, the safety selector lever assembly, and the pistol grip. Next, it’s on to the stock and final touches! Thanks,Gavin
Great Website- AccurateShooter.com | 6mmbr.com
Hey all- one of the things I like to do is help to promote websites that are run by like-minded individuals (share many of the motivations and passions that I have). One of those sites is AccurateShooter.com and 6mmbr.com – now the same site: http://accurateshooter.com This website is run by Paul McMenamin – a great […]
AR-MPR: Build Part 5 – Lower – Magazine Catch Bolt Catch Pivot Pin
In this video, we’ll start the assembly of the lower by walking through the installation of the magazine catch, the bolt catch, and the pivot pin. You’ll see a trick for installing the pivot pin that makes use of a dulled razor blade, and a modified section of drill rod. From the video, in this […]
Outdoor Shots: California Condor in Flight
There are times in life when reality seems more like floating in a dream. One of those times for me was the trip I took with my wife last year to Zion National Park and Bryce Canyon. I had seen pictures of these places before our trip, but I was really blown away at how […]
Shooting and Reloading Versatility – 357 Magnum Delivers
Let’s face it, some guns are more practical than others. A Glock 19 for range duty and carry is one of the more “utilitarian” gun values out there. An AR-15 pistol on the other hand- we’ll I’m not sure exactly what they’re for, but they sure are fun to shoot! Regarding versatility, the […]
Ultimate Reloader is moving to Feedburner for subscriptions and RSS!
Hey all- I really appreciate the response that I’ve gotten from you all regarding email and RSS subscriptions! This is a great way to stay posted on what’s going on here at www.ultimatereloader.com . I have however had trouble with my my current (as of yesterday) solution for email notifications. To make a long story […]
2011 Shot Show: Celebrity Shooters at the Hornady Booth
Another reason I wish I was at the SHOT show! Celebrity Shooters at the Hornady Booth – SHOT Show 2011
2011 SHOT Show Starts Today in Las Vegas!
Hey everyone, hope some of you have the opportunity to attend the SHOT show this year… I we won’t be attending, but I do want to cover as much reloading product information as possible from afar… For starters, here’s some booths you may be interested in visiting: Hornady Manufacturing: Booth 13145Redding Reloading: Booth 16151Dillon Precision: […]
Hornady Lock-N-Load Bullet Feeder – Loading 45 ACP
This video shows setting up and loading 45 ACP with the new Hornady Lock-N-Load Bullet feeder on the Hornady Lock-N-Load AP press. Here’ I’ll show the preferred die setup from the following post: Hornady Lock-N-Load Bullet Feeder – Die Stations Thanks, Gavin
What’s next on Ultimate Reloader
AR-MPR Rifle during test fitting – Image copyright 2011 Ultimate Reloader Hey everyone, just wanted to take a moment to give you all a heads-up regarding what’s coming up here on Ultimate Reloader. 2011 is going to be an exciting year for sure! Among other things, we’ll look at the following: AR-MPR: Lower Build We’ve […]
Hornady Lock-N-Load Bullet Feeder – Die Stations
One important thing to consider when contemplating a bullet feed system is – “How am I going to setup my dies and powder measure, and do I really have room and enough stations to make this thing work?”. Well, those are good questions, and this post will discuss a few different die configurations on the […]
Hornady Lock-N-Load Bullet Feeder – Overview
In my last related post – Hornady Bullet Feed Dies – Overview I covered the basics of the bullet feed die that is integral to the new Hornady Lock-N-Load Bullet Feeder system. In this post, we’ll take a step back and look at a “high level” feature overview of this new product. The Complete Hornady […]
AR-MPR: Build Part 4 – Upper – Bolt Carrier Group and Headspace
In this video, we’ll put the final touches on the upper assembly by walking through the assembly of the Bolt Carrier Group (BCG), checking headspace, and finally installing the BCG and charging handle into the upper receiver. Note: Here, I show you how to check headspace with the extractor installed. You can also do this […]
Hornady Lock-N-Load Bullet Feed Dies – Overview
At the heart of the new Hornady Lock-N-Load Bullet Feeder is the new bullet feed die system. The rest of the bullet feed system is important, but without a good die, it does no good to stack up bullets if they can’t be reliably placed on flared case mouths time after time. This […]
AR-MPR: Build Part 3 – Upper – Freefloat handguard
In this video, we’ll walk through the process of installing a free-float hand guard. The handguard we’re using here is a Midwest Industries 12″ free float quad rail unit. In the next video, we’ll assemble the bolt carrier group, and check headspace.
Merry Christmas 2010 from Ultimate Reloader
Merry Christmas from the folks here at Ultimate Reloader! Hoping that you all are having a great day with family celebrating all that this season is about. Anyone get anything great that they want to share about? Thanks and safe holidays, Gavin
AR-MPR: Build Part 2 – Upper – Barrel, Gas Block, Gas Tube
We’re continuing here with the upper build process for the AR-MPR rifle. In this video, we’ll walk through the process of disassembling the barrel assembly, replacing the barrel nut with the custom aluminum unit that came with the Midwest Industries freefloat handguard, install the barrel, install the gas block and gas tube, and finally replace the muzzle brake. In the next […]
Weekend AR-15 build – Gary Wood’s A2 Style Carbine
Gary Wood’s A2-style AR-15 (click for larger version) – Image Copyright 2010 Ultimate Reloader This weekend, we (some friends and myself) put together a lower from scratch, and mated this assembled lower to a pre-assembled 16″ barrel upper. This was both a fun project, and good practice for the upcoming videos on lower […]
AR-MPR: Build Part 1 – Upper – Ejection Port Cover and Forward Assist
Now that we covered planning, the parts lists, and the tools list, it’s time to get going with the AR-15 build process! We’ll start with the upper assmbly, and then move on to the lower assembly. In this video, we’ll start with the upper receiver casting, and install the ejection port cover and forward assist. […]
