Are you tired of making trips back and forth to the range to test different loads? If you’ve ever been at the range looking for the optimal powder charge or seating depth and realized you haven’t found what you needed but were out of hand loads, this video might be for you. In this video, […]
I’ve always known that load development matters, but I recently had a fundamental change in my load development philosophy. I’m going to show this with concrete results as I load precision 6.5 Creedmoor ammunition on the Area 419 ZERO press with Triebel dies from Creedmoor Sports. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: […]
Featuring more weight and buttstock adjustments, Samson is the latest addition to Foundation Stocks’ competition line. This stock has a completely different vibe than other Foundation micarta stocks – watch and read on to see the rifle I built to match! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or […]
Sometimes less is more. Many presses are large, bulky, and very heavy. However, from time to time, a handloader may want a smaller, lighter press. The RCBS Partner Press is an interesting alternative to large, heavy presses. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you […]
It’s finally begun! My next rifle build is a super precision 6GT with an MDT ACC chassis and Bat TR action. Let’s kick off the series! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, […]
Many of you in the Precision Rifle community have seen the new Patent Pending EC Tuner Brake from Erik Cortina, and have probably been thinking: “Does it work?”. In this story, we’ll find out by testing the EC Tuner Brake with three different rifles, with factory ammunition, and with handloaded ammunition. About the EC Tuner […]
My 25 Creedmoor build was a lot of fun, and now it’s time to talk load development! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for […]
Load development is a critical pathway that leads to “great things” for those of us that are obsessed with precision and accuracy. What’s difficult about load development is how time consuming it can be. Variables include brand of brass, powder type, powder charge, primer type, bullet type, bullet seating depth, and more. If you multiply […]
I recently had so much fun loading 300 Blackout with Berry’s 220 grain plated bullets, it made me think about what else I could do with these bullets. Then it came to me: how about loading 7.62x39mm with them? Shortly thereafter I was setting up a reloading press to start experimenting. I was successful in […]
300 PRC is a precision long-range cartridge and shooting platform. And when precision counts, the reloading process and capability becomes super-important. Match-grade loads can make the difference between a hit and a miss when you’re stretching out to 1000 or even 2000+ yards. In this article I’ll give you a complete walk-through of my current […]
Yes it’s tedious, and yet it takes a lot of time, but I really enjoy load development! And this time with 300 PRC, I’ll have two nearly identical barrels to perform load development with. Both are match-grade barrels from Benchmark! One will be 1:9.5 twist (the custom 300 PRC used in this article), and the […]
Loading your own ammunition enables you to achieve results with your rifles that are simply not possible with factory ammunition. The key to achieving optimal results is the painstaking process of load development for each scenario and firearm you need to load ammunition for. Here’s the big challenge: there are so many variables you can […]
