I’ve been talking about my coming 6mm ARC build for some time. This time it’s here, featuring the MDT Timbr Frontier stock! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical […]
If you need a reamer or gages for a gunsmithing project, you need to check out 4D Reamer Rentals! In this story I’ll give you a quick look at the various reamers that are available from 4D Reamer Rentals. Rifle Reamers There are so many rifle reamers available from 4D Reamer Rentals that I can’t […]
Headspace is an important consideration for both firearms inspection and for reloading. In this story, we’ll look at three ways to measure headspace for bottleneck rifle cartridge systems. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms) The content on this website (including […]
Wondering what the difference is between a standard “Case Gage” and a “Min-Chamber Gage”? That’s exactly what we’ll cover in this story! Wilson Case Gage A standard case gage from Wilson Tools and Gages (LE Wilson) is used for two things. First, you can view the back of the case gauge to check headspace (sizer […]
In this video, we’ll put the final touches on the upper assembly by walking through the assembly of the Bolt Carrier Group (BCG), checking headspace, and finally installing the BCG and charging handle into the upper receiver. Note: Here, I show you how to check headspace with the extractor installed. You can also do this […]
