If you’re looking for a good deal on a Hornady Lock-N-Load AP, this may be your chance! There are quite a few sale items if you click on the image above related to Lock-N-Load, including $25. off the Lock-N-Load AP Press! Thanks, Gavin
Poll: What handgun cartridge do you reload most often?
I know a lot of us reload a lot of different calibers, but I thought it would be interesting to find out what calibers folks are reloading most often (I’ll do another poll for rifle cartridges). Don’t see your most frequently loaded handgun cartridge? Please leave a comment!
Happy Independence Day from Ultimate Reloader
Wishing you all a safe and happy 4th of July today. We live in a great country, and have freedoms that some could only dream of! Hats off to our country. Hope you all have a chance to have great food, great company, and great explosives! Thanks, Gavin
AR-MPR: Accurizing the Upper Receiver – Test Results
In the following posts: AR-MPR: Accurizing the Upper Receiver – Part II: Milling and Receiver Face Truing AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding AR-MPR: Accurizing the Upper Receiver – Overview I’ve documented an experiment in accurizing the upper receiver of the AR-MPR rifle. It was a bit painful to file […]
Dillon No B.S. Warranty – Part 2 – After
**Update: I’ve heard of multiple experiences where Dillon has wanted to charge customers for this kind of service (fixes, etc). Your mileage may vary! In my last post, I documented the “Before” part of Lewis Curtis’ Dillon XL-650 No B.S. Warranty story. In this post, I’ll follow-up with what Dillon decided to do with Lewis’ […]
Dillon No B.S. Warranty – Part 1 – Before
**Update: I’ve heard of multiple experiences where Dillon has wanted to charge customers for this kind of service (fixes, etc). Your mileage may vary! A friend of mine Lewis Curtis recently managed to negotiate a great trade on a used Dillon XL-650 outfit loaded with extras. It’s rare to find a good deal on these […]
Poll: What Rifle Case Lube Do You Use?
One of the frequently debated topics related to rifle cartridge loading is what case lube to use. Now you have a chance to let us know what you use! Please drop a comment to describe why, or if your lube type is not on the list. Thanks, Gavin
AR-MPR: Accurizing the Upper Receiver – Part II: Milling and Receiver Face Truing
In this post, I’ll finish covering the accurizing steps and experiments for the AR-MPR upper receiver- so far, we’ve covered the following: AR-MPR: Accurizing the Upper Receiver – Overview AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding Following the welding process, I carefully milled and measured the sides of the upper receiver […]
AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding
In my last post, outlined some ideas and goals for talking the slop out of the fit between the upper and lower receivers on the AR-MPR rifle. The first step is to remove the gaps between the sides of the upper receiver lugs, and the channels at the front and back of the lower receiver. […]
AR-MPR: Accurizing the Upper Receiver – Overview
A while back, I posted some AR-MPR rifle accurizing plans. This was my first-pass at enhancing the accuracy of the AR-MPR rifle. Since this post, I have had a few range visits (sorry, don’t have photos as the range does not permit photography) where I did not see the kind of accuracy and consistency that […]
Great Forum – Handloads.com
If you are like me, you grow tired of forums where people spread mis-information, and can’t control their attitudes/tempers. Amidst all the nonsense, you may have found some forums online where there are a group of cool guys that like to hang out, talk guns, and help each-other out. It’s nice to have a mix […]
Ultimate Reloader turns 1,000,000 on YouTube!
Hey everyone- just wanted to thank you all for the support on YouTube and on this website! Back in September I posted that Ultimate Reloader had hit the 500,000 views mark on YouTube (gavintoobe). Since then, Ultimate Reloader has racked up over 500,000 additional views- doubling our total view count. Thanks very much for your […]
Dale Miller’s AR-15 – Completed!
When it comes to guy time – it’s hard to beat putting a rifle together from scratch! Recently, my good friend and neighbor Dale Miller and I started to put together an AR-15 (his first AR-15) for him from individual parts. I already had the tools and supplies from the AR-MPR build, so putting together […]
Poll: What Progressive Reloading Press Do You Use Most?
I would love to find out more about what equipment people are using for metallic cartridge reloading. Please pick the press that you use most frequently. If your most used press is not listed here, please leave a comment! Thanks, Gavin
RCBS Rifle Bullet Feeder on RCBS Pro-2000 – Some Notes
For a while I have been wondering about the RCBS Rifle Bullet Feeder – and now that I’ve setup and used the 22 caliber kit on the RCBS Pro-2000, I know a lot more about how this tool works, and what it is capable of. Setting up the unit is fairly straightforward, with a requirement […]
AR-MPR – Hornady Lock-N-Load AP Loading 223
Continuing with our coverage of high-volume loading of .223 Remington and 5.56 NATO ammunition for the AR-MPR project, this time we’ll look at using the Hornady Lock-N-Load AP to load for the AR-15. In this video, I’ll show loading in full progressive mode with the use of the Hornady Lock-N-Load Case Feeder system as well. […]
