Category: AR-MPR Phase III

RCBS Rifle Bullet Feeder on RCBS Pro-2000 – Some Notes

For a while I have been wondering about the RCBS Rifle Bullet Feeder – and now that I’ve setup and used the 22 caliber kit on the RCBS Pro-2000, I know a lot more about how this tool works, and what it is capable of. Setting up the unit is fairly straightforward, with a requirement […]

AR-MPR – Hornady Lock-N-Load AP Loading 223

Continuing with our coverage of high-volume loading of .223 Remington and 5.56 NATO ammunition for the AR-MPR project, this time we’ll look at using the Hornady Lock-N-Load AP to load for the AR-15. In this video, I’ll show loading in full progressive mode with the use of the Hornady Lock-N-Load Case Feeder system as well. […]

AR-MPR – RCBS Rifle Bullet Feeder on Pro-2000 Loading 223

If you have an AR-15, you know that they tend to chew through ammo very quickly. It’s a lot of fun, but it also gets expensive really quickly, especially if you are requiring match-grade ammunition. The solution is to load .223/5.56 on a progressive reloading press. If you really want to crank it up, you […]

AR-MPR- RCBS Rifle Bullet Feeder Overview Part II

Recently, I gave a quick overview of the RCBS Rifle Bullet Feed System. In that post, I gave an overview of what’s included in the kit. In this post, we’ll take a look at what this system looks like installed on a 5-Station reloading press (The RCBS Pro-2000 in this case). As you can see […]

AR-MPR- RCBS Rifle Bullet Feeder Overview

Phase III of the AR-MPR AR-15 rifle project is really all about “precision mass production” of the ammunition that we’re developing in Phase II (precision single stage loading). There are a couple key things that we’ll explore: first, we’ll look at progressive reloading of .223 / 5.56 ammunition. We’ll also extend our production rates by […]

Become a Patron!



Reloading Safety

Polls

Contact Ultimate Reloader

Contact ultimate reloader by clicking here.