To this point we’ve cleaned, resized, trimmed, and primed our rifle brass. Now it’s time to charge it with smokeless powder! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
In the first video in this series, we cleaned once-fired Federal cases using Lyman’s vibratory tumbler and walnut shell media. We then resized the cases, decapped/deprimed them, trimmed them and did any other necessary case-prep work. Next up is priming! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching […]
We’ve tested Hornady’s ELD-X hunting bullet in a number of different calibers and have been consistently impressed with its accuracy and performance in Clear Ballistics Gel blocks. It was time to take that bullet elk hunting! *Note: This is a successful hunting story and video. The harvest is shown here and in the video. Disclaimer […]
Here at Ultimate Reloader, we use a lot of sophisticated equipment, but every person needs to start with the basics. In this series, we’ll review the basics of reloading for all the beginners out there, starting with cleaning brass! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video […]
Though priming a large number of cases can be taxing, many prefer handheld priming tools because the handloader can feel the primer being seated into the primer pocket. A properly seated primer is vital for consistency and accuracy. Primer seating on most presses provides so much leverage that “feel” is sacrificed. Some handheld priming tools […]
