Are you tired of making trips back and forth to the range to test different loads? If you’ve ever been at the range looking for the optimal powder charge or seating depth and realized you haven’t found what you needed but were out of hand loads, this video might be for you. In this video, […]
Ever since I met Erik Cortina, I’ve been curious about F-Class. It’s finally time to shoot my very own 7 PRCW! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, […]
I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2! *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
