When you’re talking magnum calibers, a brake is one of the best investments you can make! Sure, the guys shooting next to you may not like it, but it’s a GREAT way to take the edge off heavy recoiling rifles and cartridges. Benchmark is known for world-record-setting barrels- but they also make muzzle brakes! In […]
For any precision-oriented rifle, the chambering work is absolutely critical. Having a chamber with smooth walls, proper headspace, and correct alignment is an absolute requirement when maximum precision is the goal. In this article, I’ll outline the chambering and machining work I did for my full-custom 300 PRC rifle build. I did things a bit […]
Originally published on our sister site Making with Metal. One of the first things I do when I get a new piece of machine shop equipment is to decide how I’ll “customize” the machine and organize all of the tooling. Machining is a very personal thing, and it’s therefore “just a part of the process” […]
Why do we have standards that are “close but not quite compatible”? I ask myself that frequently when it comes to technology, tools, and firearms. I ran into this exact issue a few days ago when I went to install a scope on my TC Compass. The only scope rings I had that would work […]
As I look forward to getting possession of my SilencerCo Osprey 45- I’m particularly interested in shooting a BUNCH of 45 AP. 45 ACP is subsonic, and is therefore an ideal cartridge to shoot suppressed due to how quiet it can be. I do have a 1911 (Taurus PT-1911), but it came from the factory […]
A threaded muzzle is great, but if you aren’t using a muzzle brake or suppressor, you’ll need something to protect the (fragile) threads! That’s where a thread protector comes in handy. One of the best ways to make a thread protector is with a cut-down section of barrel blank. Good thing I had this “extra” […]
Here’s my philosophy: why not have a threaded muzzle? If you want to use a muzzle brake or a suppressor, you’re all set! If you don’t use a muzzle device, you put a thread protector on, and you’re good to go. So now that we’ve completed the breech-end barrel work, let’s move on to the […]
Sometimes you have to do a lot of “prep work” to get to the “fun work”. Well, after building out our build-sheet, and preparing and aligning the barrel, we’re now to the fun part of this build! That’s right, it’s time to start machining the tenon, and cutting the chamber! Series navigation: 224 Valkyrie Remington […]
This is going to be perhaps the most in-depth project I’ve taken on here on Ultimate Reloader- building two rifles, working up load data, measuring ballistics, and a bunch of related field work (hunting, and who knows what else). I’m excited to get started, and to share these experiences with you. What is it I’m […]
