Tag: Reloading Blog

The only reloading blog with comprehensive coverage and HD videos of the industry’s leading progressive reloading equipment for both pistol and rifle

Page 37 of 43
1 35 36 37 38 39 43

AR-308 – Brass and Brass Prep Basics

Now that we’ve finished provisioning the LR-308B rifle for the AR-308 project, it’s time to gear up for precision handloading! Before we start loading, we need to get brass, and prep that brass. It turns out that for precision rifle loading, much of the labor and attention to detail is really related to the brass. […]

AR-308 – Redding equipment overview

One of the things I like most about these kinds of projects (AR-MPR, AR-308) is the opportunity to showcase new reloading equipment (new to the market, or new to my shop :)). For the next phase of the AR-308 project, we’ll transition to a focus on precision single stage reloading. This will involve things like […]

AR-308 – Millett TRS-1 Scope Install

Following up on the last post covering the Millett Tactical TRS-1 scope, in this video I’ll cover the mounting procedure for this scope using a pair of Millett tactical scope rings (medium height). I’ll also demonstrate the use of the Wheeler Engineering Firearms Accurizing Torque (FAT) wrench. This is a simple scope mounting procedure where […]

45 ACP Progressive Reloader Roundup

Hello all- In honor of the 100th anniversary of the Colt 1911 pistol, I thought I would put together a post that showcases various progressive reloading presses cranking out 45 ACP ammo! This caliber is very versatile, and continues to be a favorite for both target shooters, law enforcement, and self defense. There are plenty […]

Hornady Bullet Feeder – Have you used it?

Hey everyone, just wanted to recap the information and videos that I’ve posted on the Hornady Bullet Feeder for pistol cartridges. Here are the previous posts related to this bullet feeder: Hornady Lock-N-Load Bullet Feeder – Loading 45 ACP Hornady Lock-N-Load Bullet Feeder – Die Stations Hornady Lock-N-Load Bullet Feeder – Overview Hornady Lock-N-Load Bullet […]

AR-308 – Millett TRS-1 Scope Specifications and Details

In my last post, we took  a look at the features and overall fit/finish for the Millett TRS-1 tactical scope. In this post, we’ll get into more details and look at the specs for this scope. When you purchase the Millett TRS-1 scope, you get the following: Scope Dust caps (for objective and eyepiece) – […]

AR-308 – Millett TRS-1 4-16x50mm Scope Overview

One of the most important components of a good long range rifle is the scope. It goes without saying that a scope must hold zero in order for a rifle to shoot tight groups. The quality of the optics, the repeatability and accuracy of the windage/elevation adjustments, and other factors also play a key role […]

AR-308 – Geissele SD-C Trigger Upgrade

A while back, I posted the Geissele trigger install video while building the AR-MPR AR-15 rifle. I liked the Geissele trigger used on the AR-MPR project so much, that I decided to buy one for the AR-308 project – this time a different version. In this video, we’ll remove the factory trigger, and replace it […]

AR-308 – Project Phases and Details

Now that I’ve formally kicked-off the AR-308 project, I wanted to take a moment to give a high level overview of what I’ll cover over the course of this project. The goal is to learn about the .308 Winchester / 7.62x51mm cartridge family, take a close look at the DPMS LR-308 rifle platform, and also […]

AR-308 – Loading the LR-308b – Project Kickoff

I’m excited to announce a new project we’ll be working through here on http://ultimatereloader.com that will extend some of what we did with AR-MPR, but this time we’ll focus on the “big brother” to the AR-15- the AR-10 platform, specifically the DPMS LR-308B. For optics, we’ll get an up-close look at the Bushnell/Millett TRS-1 tactical […]

AR-MPR: Accurizing the Upper Receiver – Test Results

In the following posts: AR-MPR: Accurizing the Upper Receiver – Part II: Milling and Receiver Face Truing AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding AR-MPR: Accurizing the Upper Receiver – Overview I’ve documented an experiment in accurizing the upper receiver of the AR-MPR rifle. It was a bit painful to file […]

AR-MPR: Accurizing the Upper Receiver – Part II: Milling and Receiver Face Truing

In this post, I’ll finish covering the accurizing steps and experiments for the AR-MPR upper receiver- so far, we’ve covered the following: AR-MPR: Accurizing the Upper Receiver – Overview AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding Following the welding process, I carefully milled and measured the sides of the upper receiver […]

AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding

In my last post, outlined some ideas and goals for talking the slop out of the fit between the upper and lower receivers on the AR-MPR rifle. The first step is to remove the gaps between the sides of the upper receiver lugs, and the channels at the front and back of the lower receiver. […]

AR-MPR: Accurizing the Upper Receiver – Overview

A while back, I posted some AR-MPR rifle accurizing plans. This was my first-pass at enhancing the accuracy of the AR-MPR rifle. Since this post, I have had a few range visits (sorry, don’t have photos as the range does not permit photography) where I did not see the kind of accuracy and consistency that […]

Page 37 of 43
1 35 36 37 38 39 43
For Commerical Inquiries:
Ulitmate Reloader Commercial Services

Reloading Safety