In this video you will see how to load 44 magnum ammunition with the Redding T-7 Turret reloading press. Specifically, you’ll see the following: – Changing calibers from 357 Magnum to 44 Magnum (sliebar priming system, shell holder) – Use of a Hornady Lock-N-Load case-activated powder measure – Sizing/Depriming, Priming, Expanding, Powder Charging, Bullet seating/Crimping […]
In this video, you’ll see an overview of how 44 Magnum ammunition is loaded with the Hornady Lock-N-Load AP Progressive reloading press with EZ-Ject. Also covered is the use of the Hornady Lock-N-Load AP Progressive case feeder. In this video, the Hornady Lock-N-Load progressive reloading press is setup with a combination seating and crimping die. […]
This second video in a two part video series gives an overview of the EZ-Ject upgrade kit for the Hornady Lock-N-Load AP Progressive reloading press and demonstrates how to install the kit. I found that this kit installs with little trouble, and I’m impressed that Hornady even includes a special tool for the primer tool […]
This first video in a two part video series gives an overview of the EZ-Ject upgrade kit for the Hornady Lock-N-Load AP Progressive reloading press and demonstrates how to install the kit. In the second video, you’ll see what additional steps are necessary to complete this job on your Hornady Lock-N-Load AP progressive reloading press.
This second video in a two video series finishes the demonstration of how to change calibers and load .223 reminton ammo on a Redding T-7 reloading press. In this installment, you’ll see the case charging process with the Redding #BR3 benchrest powder measure, and the bullet seating process. Note that for high-volume .223 Remington reloading, […]
