It’s time to start loading some precision 308 Winchester ammo for the LR-308 project! Our rifle is all tuned up and tricked out, and now we need some capable ammunition to shoot. In this video, I’ll walk through the process of validating sizing die setup with the new Redding Instant Indicator, and we’ll see how […]
As tinkering guys, we are always looking to make our machinery smoother, faster, better, and more efficient. If there’s a way to squeeze more out of our equipment, chances are one of us will think of a way to make that happen! One of these tinkerers is Doug Williams. Doug is a big fan of […]
Now that we’ve finished provisioning the LR-308B rifle for the AR-308 project, it’s time to gear up for precision handloading! Before we start loading, we need to get brass, and prep that brass. It turns out that for precision rifle loading, much of the labor and attention to detail is really related to the brass. […]
One of the things I like most about these kinds of projects (AR-MPR, AR-308) is the opportunity to showcase new reloading equipment (new to the market, or new to my shop :)). For the next phase of the AR-308 project, we’ll transition to a focus on precision single stage reloading. This will involve things like […]
Following up on the last post covering the Millett Tactical TRS-1 scope, in this video I’ll cover the mounting procedure for this scope using a pair of Millett tactical scope rings (medium height). I’ll also demonstrate the use of the Wheeler Engineering Firearms Accurizing Torque (FAT) wrench. This is a simple scope mounting procedure where […]
Hello all- In honor of the 100th anniversary of the Colt 1911 pistol, I thought I would put together a post that showcases various progressive reloading presses cranking out 45 ACP ammo! This caliber is very versatile, and continues to be a favorite for both target shooters, law enforcement, and self defense. There are plenty […]
Hey everyone, just wanted to recap the information and videos that I’ve posted on the Hornady Bullet Feeder for pistol cartridges. Here are the previous posts related to this bullet feeder: Hornady Lock-N-Load Bullet Feeder – Loading 45 ACP Hornady Lock-N-Load Bullet Feeder – Die Stations Hornady Lock-N-Load Bullet Feeder – Overview Hornady Lock-N-Load Bullet […]
A bunch of you have asked me what color I used on my steel pedestal for the Hornady Lock-N-Load AP – plans available here: (I later painted it gray to blend in with multiple presses…) Lock-N-Load Steel Stand / Pedestal Plans Available! You can find a good match for the Hornady red color by using […]
In my last post, we took a look at the features and overall fit/finish for the Millett TRS-1 tactical scope. In this post, we’ll get into more details and look at the specs for this scope. When you purchase the Millett TRS-1 scope, you get the following: Scope Dust caps (for objective and eyepiece) – […]
One of the most important components of a good long range rifle is the scope. It goes without saying that a scope must hold zero in order for a rifle to shoot tight groups. The quality of the optics, the repeatability and accuracy of the windage/elevation adjustments, and other factors also play a key role […]
A while back, I posted the Geissele trigger install video while building the AR-MPR AR-15 rifle. I liked the Geissele trigger used on the AR-MPR project so much, that I decided to buy one for the AR-308 project – this time a different version. In this video, we’ll remove the factory trigger, and replace it […]
In this post and video, we’ll see exactly what you get in the box when you take delivery of a DPMS LR-308B rifle. I’m always wanting to know what I’m getting before I buy something, so I figured you all would appreciate a comprehensive unpacking write-up for this rifle! Here’s a video showing what’s in […]
In the following posts: AR-MPR: Accurizing the Upper Receiver – Part II: Milling and Receiver Face Truing AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding AR-MPR: Accurizing the Upper Receiver – Overview I’ve documented an experiment in accurizing the upper receiver of the AR-MPR rifle. It was a bit painful to file […]
In this post, I’ll finish covering the accurizing steps and experiments for the AR-MPR upper receiver- so far, we’ve covered the following: AR-MPR: Accurizing the Upper Receiver – Overview AR-MPR: Accurizing the Upper Receiver – Part I: Prep and Welding Following the welding process, I carefully milled and measured the sides of the upper receiver […]
In my last post, outlined some ideas and goals for talking the slop out of the fit between the upper and lower receivers on the AR-MPR rifle. The first step is to remove the gaps between the sides of the upper receiver lugs, and the channels at the front and back of the lower receiver. […]
A while back, I posted some AR-MPR rifle accurizing plans. This was my first-pass at enhancing the accuracy of the AR-MPR rifle. Since this post, I have had a few range visits (sorry, don’t have photos as the range does not permit photography) where I did not see the kind of accuracy and consistency that […]
