Ever since I started the AR-308 project here on Ultimate Reloader, I’ve been scheming up and crafting the “ultimate” (pun intended) reloading setup for precision 308 ammunition. I really enjoy shooting the LR-308B rifle, and I know exactly what I’m looking for in a 308 loading setup for everyday precision shooting: Efficiency in brass prep […]
Now that we’ve covered the precision loading process for the AR-308 project, it’s time now to move on to progressive reloading. This will enable us to load ammunition very quickly. If we select the right equipment, and are careful and strategic to setup this equipment, we can also attain very high consistency for the ammo […]
Now that we’ve finished provisioning the LR-308B rifle for the AR-308 project, it’s time to gear up for precision handloading! Before we start loading, we need to get brass, and prep that brass. It turns out that for precision rifle loading, much of the labor and attention to detail is really related to the brass. […]
One of the things I like most about these kinds of projects (AR-MPR, AR-308) is the opportunity to showcase new reloading equipment (new to the market, or new to my shop :)). For the next phase of the AR-308 project, we’ll transition to a focus on precision single stage reloading. This will involve things like […]
Following up on the last post covering the Millett Tactical TRS-1 scope, in this video I’ll cover the mounting procedure for this scope using a pair of Millett tactical scope rings (medium height). I’ll also demonstrate the use of the Wheeler Engineering Firearms Accurizing Torque (FAT) wrench. This is a simple scope mounting procedure where […]
In my last post, we took a look at the features and overall fit/finish for the Millett TRS-1 tactical scope. In this post, we’ll get into more details and look at the specs for this scope. When you purchase the Millett TRS-1 scope, you get the following: Scope Dust caps (for objective and eyepiece) – […]
One of the most important components of a good long range rifle is the scope. It goes without saying that a scope must hold zero in order for a rifle to shoot tight groups. The quality of the optics, the repeatability and accuracy of the windage/elevation adjustments, and other factors also play a key role […]
A while back, I posted the Geissele trigger install video while building the AR-MPR AR-15 rifle. I liked the Geissele trigger used on the AR-MPR project so much, that I decided to buy one for the AR-308 project – this time a different version. In this video, we’ll remove the factory trigger, and replace it […]
In this post and video, we’ll see exactly what you get in the box when you take delivery of a DPMS LR-308B rifle. I’m always wanting to know what I’m getting before I buy something, so I figured you all would appreciate a comprehensive unpacking write-up for this rifle! Here’s a video showing what’s in […]
Now that I’ve formally kicked-off the AR-308 project, I wanted to take a moment to give a high level overview of what I’ll cover over the course of this project. The goal is to learn about the .308 Winchester / 7.62x51mm cartridge family, take a close look at the DPMS LR-308 rifle platform, and also […]
I’m excited to announce a new project we’ll be working through here on http://ultimatereloader.com that will extend some of what we did with AR-MPR, but this time we’ll focus on the “big brother” to the AR-15- the AR-10 platform, specifically the DPMS LR-308B. For optics, we’ll get an up-close look at the Bushnell/Millett TRS-1 tactical […]
