Hey everyone, hope some of you have the opportunity to attend the SHOT show this year… I we won’t be attending, but I do want to cover as much reloading product information as possible from afar… For starters, here’s some booths you may be interested in visiting: Hornady Manufacturing: Booth 13145Redding Reloading: Booth 16151Dillon Precision: […]
This video shows setting up and loading 45 ACP with the new Hornady Lock-N-Load Bullet feeder on the Hornady Lock-N-Load AP press. Here’ I’ll show the preferred die setup from the following post: Hornady Lock-N-Load Bullet Feeder – Die Stations Thanks, Gavin
AR-MPR Rifle during test fitting – Image copyright 2011 Ultimate Reloader Hey everyone, just wanted to take a moment to give you all a heads-up regarding what’s coming up here on Ultimate Reloader. 2011 is going to be an exciting year for sure! Among other things, we’ll look at the following: AR-MPR: Lower Build We’ve […]
In my last related post – Hornady Bullet Feed Dies – Overview I covered the basics of the bullet feed die that is integral to the new Hornady Lock-N-Load Bullet Feeder system. In this post, we’ll take a step back and look at a “high level” feature overview of this new product. The Complete Hornady […]
In this video, we’ll put the final touches on the upper assembly by walking through the assembly of the Bolt Carrier Group (BCG), checking headspace, and finally installing the BCG and charging handle into the upper receiver. Note: Here, I show you how to check headspace with the extractor installed. You can also do this […]
At the heart of the new Hornady Lock-N-Load Bullet Feeder is the new bullet feed die system. The rest of the bullet feed system is important, but without a good die, it does no good to stack up bullets if they can’t be reliably placed on flared case mouths time after time. This […]
We’re continuing here with the upper build process for the AR-MPR rifle. In this video, we’ll walk through the process of disassembling the barrel assembly, replacing the barrel nut with the custom aluminum unit that came with the Midwest Industries freefloat handguard, install the barrel, install the gas block and gas tube, and finally replace the muzzle brake. In the next […]
Gary Wood’s A2-style AR-15 (click for larger version) – Image Copyright 2010 Ultimate Reloader This weekend, we (some friends and myself) put together a lower from scratch, and mated this assembled lower to a pre-assembled 16″ barrel upper. This was both a fun project, and good practice for the upcoming videos on lower […]
Now that we covered planning, the parts lists, and the tools list, it’s time to get going with the AR-15 build process! We’ll start with the upper assmbly, and then move on to the lower assembly. In this video, we’ll start with the upper receiver casting, and install the ejection port cover and forward assist. […]
Recently, I did some gunsmithing on a friend’s Taurus Model 66 357 Magnum revolver. I thought I’d take this opportunity to share a picture of this gun with you all. (I figure more gun pics is better than less gun pics, right?) While we’re at it, do you all want to share your favorite 357 […]
It’s that time of season. Christmas is coming fast. I’m sure you’ve all purchased your loved ones presents (hint guys- make sure you get your wife something nice 🙂 – and soon). But I’m also sure you’ve given out lists of what you’d like for Christmas. So what is it you’re dreaming of? […]
I’ll be the first to admit it- I’m totally a “tool guy”. I typically get as much satisfaction out of the tools as I get spending time on the project that I’m using the tools for. I like tools- I like machinery- I like to fix and restore tools and machinery. I like to think […]
In my last AR-MPR post, I gave an overview of the parts that will be used to assemble the AR-MPR upper assembly. In this post, we’ll take a look at the rest of the rifle- the lower assembly (OK, there’s also optics and accessories, we’ll but we’ll cover those later). I started this project with […]
You may have noticed that retailers have finally started stocking the new Hornady Bullet Feeder for pistol reloading. This is an exciting release, because this is the first bullet feeder that’s the same “color” as the corresponding press and electric case feed system that it’s designed to work with. I have actually spent some time […]
The AR-MPR Upper Assembly shown here during test fitting of components – Click here for larger view – Images Copyright 2010 Ultimate Reloader Before we actually start with the build process for the AR-MPR rifle, I want to post some information about the parts and tools that are required for such a build. In this […]
Planning an AR-15 build can be more than a bit overwhelming! In this video I’ll walk you through some of the high-level decisions that you’ll need to make in order to get your AR-15 plans underway. Did I miss anything important here? Please leave a comment if you have something to add. Next, we’ll take […]
