I recently kicked off my 7 PRCW build. Today, I’m going through all the steps to machine and install an EC Tuner V2! *Note: For the O-Ring to work properly you should not go below the 0.935″ on the EC Tuner V2 tenon print. It is suggested that you cut a separate thread narrow relief […]
Some time ago, Erik Cortina challenged me to start shooting F-Class. I’m finally starting my F-Class build, a 7mm PRCW. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing […]
I recently showed how to make a rigid reamer holder in preparation for chambering for my 50 BMG. Today, we’re highlighting the barrel work. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
I’ve mentioned rigid reamer holders many times, most recently in my 50 BMG build kickoff. Today, I’m showing you how to make your own! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
I’ve been wanting a 50 BMG for 10 years. I originally planned content around an OEM rifle, but now, I get to build one! Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading […]
Master gunsmith and author Fred Zeglin joins us to share everything you ever wanted to know about reamers. Disclaimer Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other […]
Can you imagine building a rifle from scratch (including the action) in High School shop class? That’s exactly what Bruce Thom of Bat Machine did when he was just 16 years old! In this story, we’ll look at some of his early rifle builds, and a recent one too! It was very inspiring to see […]
