I first heard about Bix’n Andy Triggers from BAT Machine and have greatly enjoyed shooting them. Two of my recent builds, the .280 AI and Stiller Predator .22 Creedmoor, have included the Bix’n Andy Dakota and Competition triggers. This time we’re going deeper, digging into the company’s founding as well as using the TriggerScan TS-11 to collect data on several Bix’n Andy models.
Disclaimer
Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.
About Bix’n Andy
Bruce Thom and I have had extensive conversations about ball trigger technology. He explained these triggers are his favorite to pair with his actions for their functioning and tunability. I’ve been using Bix’n Andy ball triggers for some time now – look back to my Eddie Van Halen tribute rifle and 7mm PRC Freedom Rifle builds.
Bix’n Andy is headquartered in Austria and has 30 years of industry presence. Owner and Founder Andy Atzl patented ball trigger technology he created for benchrest shooting.
Unlike other triggers, the side of Bix’n Andy triggers is removable, allowing you to see the internal components. This allows for easy troubleshooting and custom adjustments like sear engagement. You can also perform basic trigger cleaning and maintenance without voiding the warranty.
From Bullet Central:
Bix’n Andy: A Legacy of Precision in Gunsmithing and Innovation
Founded in the historic gunsmithing town of Ferlach, Bix’n Andy began as a specialized gunsmith shop before expanding into the manufacture of custom hunting and benchrest rifles, such as the renowned “Alusta 1130 & 300.” The company’s early commitment to quality and innovation was evidenced by the development of the “6×51 Atzl” ammunition and a series of victories in national and international shooting competitions, including a Vice World Championship in Benchrest. This foundation of excellence set the stage for a series of expansions and innovations, including the introduction of precision bullets, handgun tuning, and becoming the general importer for “BORDER” barrels in Austria.
Over the decades, Bix’n Andy has continued to evolve, leveraging advancements in CNC technology to enhance its product lineup, which now includes the “BR.666er Atzl” precision bullet and the groundbreaking “HAWK” benchrest model. The company’s achievements are marked by numerous titles in various shooting disciplines and the development of cutting-edge products like the “Atzl-Threepoint” support assembly and a range of highly regarded bullet triggers that have set world records. With a commitment to craftsmanship and the integration of state-of-the-art manufacturing facilities, Bix’n Andy celebrates over 25 years of excellence, driving forward the legacy of Ferlach’s gunsmithing tradition while setting new standards in the shooting sports industry.
Every Bix’n Andy trigger has four key parts: the top sear, retainer bar, bottom sear, and trigger shoe.
The top sear holds the cocking piece backwards while the gun is cocked. The retainer bar holds two ball bearings that hold the top sear up.
TriggerScan Results
We’ve installed Bix’n Andy triggers for rifle upgrades and full builds, using the Dakota, TacSport, TacSport PRO-X, and Competition triggers.
The TriggerScan TS-11 from DVORAK Instruments produces a force-distance plot that reveals intimate data about the trigger under testing.
You can recognize grit, creep, overtravel, and more— allowing for quantification you cannot obtain any other way.
Bix’n Andy Competition Single-Stage Trigger
This benchrest-oriented trigger is available with or without a safety (right-or left-handed). Pull weight ranges from 30 grams (0.066 lbs.) to 800 grams (1.783 lbs.). The sear is also adjustable, making it an ideal trigger for F-Class.
The forces were so low I had to significantly zoom in on the TriggerScan plot to see what was going on.
I ran three iterations of tests with minimum, medium (in the middle), and maximum pull weights with the light spring. My testing revealed that you can adjust the trigger to slightly below the published minimum pull weight and slightly above the published maximum pull weight.
The exact bounds are less important than getting optimal sear engagement and pull weight while keeping the rifle in a safe condition.
Bix’n Andy Competition Two-Stage Trigger
Bix’n Andy also makes a Competition Two-Stage trigger. It does not come with a trigger shoe as the assumption is that the shooter will want to further personalize the trigger by selecting his/her own. (Ours has a shoe that was provided separately.)
It is also available with or without a safety in right- or left-handed configurations. Like the single stage, minimum pull weight is 30 grams (0.066 lbs.), but maximum published pull weight is 500 grams (1.100 lbs.). The trigger has an adjustable sear and is popular for benchrest, F-Class, and match shooting applications.
I tried to test a variety of different configurations. By varying pull weights, sear adjustments, and spring selection, you can truly make this trigger your own.
Bix’n Andy TacSport X Trigger
The TacSport X is available in both single-stage and two-stage models as well as right- or left-hand safeties.
We have the single stage model with adjustable sear. Minimum published pull weight is 283 grams (0.620 lbs.) and maximum published pull weight is 2000 grams (4.40 lbs.). This is an extremely generous range of adjustment!
The precision trigger has a removable bolt release and is intended for PRS, competitive shooting, and hunting.
The TriggerScan results were extremely consistent, indicating a repeatable, crisp break across several different pull weights.
Bix’n Andy TacSport PRO-X Trigger
The TacSport PRO-X is very similar to the TacSport X, but with a lower pull weight. Published pull range is from 3.5 oz. to 2.2 lbs.
It has an adjustable sear and is available with a right- or left-hand safety. (An optional bolt release is also available.) This single-stage trigger is popular for ELR, PRS, F-Class, hunting/varmint, and precision shooting. (Bix’n Andy also makes a two-stage version.)
The resulting TriggerScan test results were the most consistent I’ve ever had with any trigger.
Note: I didn’t have the trigger set to true minimum, as it goes far below the 9.92 ounces I ran the test with.
Bix’n Andy Dakota Single-Stage Trigger
The Dakota single-stage is designed for shooting sports, hunting, and long range.
It has a right- or left-hand safety and a published pull weight range of 0.99 lbs. to 4.41 lbs. Unlike the other models, it does not have an adjustable sear, but there is an optional bolt release available.
The Dakota TriggerScan results came second in consistency to the TacSport PRO-X results.
Part of this may be due to perfecting my technique over time. I really like this trigger for hunting and affordability. I have had great results with both the Rem 700 version and the Tikka T3x model.
Conclusion
One of the greatest strengths of Bix’n Andy triggers are their versatility and adjustability. While some triggers have wider ranges than others, you can make each one your own and change it with your preferences.
Ball triggers minimize friction while maximizing functionality. You can even clean the intervals without voiding the warranty.
Bullet Central is the exclusive American distributor and has a wide selection of triggers as well as installation tips on their YouTube channel. Savage models are also on their way!
Get the Gear
Shop Bix’n Andy Triggers at Bullet Central!
Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!
Thanks,
Gavin Gear
